corpus.blog
41554 blogs · [ { "id": "01a0dd4e-973c-73f1-9ac5-2f8f4a75170d", "title": "How I Repaired a Dead Mitsubishi Colt Dashboard Display", "url": "https://www.tastethecode.com/how-i-repaired-a-dead-mitsubishi-colt-dashboard-display", "published_at": "2026-09-25T10:10:00+00:00" }, { "id": "01a0d3b8-e732-73b7-b545-3a273891ab1a", "title": "Inside the SLZB Ultima: Radios, Add-On Modules and IO Pins", "url": "https://www.tastethecode.com/inside-the-slzb-ultima-radios-add-on-modules-and-io-pins", "published_at": "2026-09-13T16:28:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872cff559c7", "title": "FNIRSI LPM-10 Review: Testing Every Function of This Network Cable Tester", "url": "https://www.tastethecode.com/fnirsi-lpm-10-review-testing-every-function-of-this-network-cable-tester", "published_at": "2026-09-05T12:29:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d097d520", "title": "Building a Standalone RFID Door Lock with the RC522 and an ESP32", "url": "https://www.tastethecode.com/building-a-standalone-rfid-door-lock-with-the-rc522-and-an-esp32", "published_at": "2026-08-31T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d1437aac", "title": "Monitoring Temperature, Humidity and Air Quality with the BME680", "url": "https://www.tastethecode.com/monitoring-temperature-humidity-and-air-quality-with-the-bme680", "published_at": "2026-08-15T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d188e654", "title": "Repairing a Weather Station Without Replacing Parts", "url": "https://www.tastethecode.com/repairing-a-weather-station-without-replacing-parts", "published_at": "2026-07-29T09:41:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d2279004", "title": "Flashing and Configuring ESP Claw on UNIHIKER K10 ESP32-S3 Board", "url": "https://www.tastethecode.com/flashing-and-configuring-esp-claw-on-unihiker-k10-esp32-s3-board", "published_at": "2026-07-20T09:31:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d27e0c35", "title": "DIY Multi-Zone Drip Irrigation with Tasmota and an Isolated Relay Board", "url": "https://www.tastethecode.com/diy-multi-zone-drip-irrigation-with-tasmota-and-an-isolated-relay-board", "published_at": "2026-06-12T19:31:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d2c7689f", "title": "Building a Smart Pellet Stove Monitor with HC-SR04, ESP8266 and Tasmota", "url": "https://www.tastethecode.com/building-a-smart-pellet-stove-monitor-with-hc-sr04-esp8266-and-tasmota", "published_at": "2026-05-31T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d34ea005", "title": "Using OpenPLC to Run Industrial Control Logic on an Arduino Uno", "url": "https://www.tastethecode.com/using-openplc-to-run-industrial-control-logic-on-an-arduino-uno", "published_at": "2026-05-22T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d3ce0ace", "title": "How I Built a DIY Bench Power Supply Enclosure with the Longer B1 Laser", "url": "https://www.tastethecode.com/how-i-built-a-diy-bench-power-supply-enclosure-with-the-longer-b1-laser", "published_at": "2026-05-15T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d4133ba5", "title": "Disposable Vape Teardown: Free 850mAh Battery, USB-C Charger and a Tiny Display", "url": "https://www.tastethecode.com/disposable-vape-teardown-free-850mah-battery-usb-c-charger-and-a-tiny-display", "published_at": "2026-04-25T05:54:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d496f7f6", "title": "DM9 Digital Microscope Unboxing, Setup, and First PCB Tests", "url": "https://www.tastethecode.com/dm9-digital-microscope-unboxing-setup-and-first-pcb-tests", "published_at": "2026-04-22T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d4f48e9a", "title": "18650 Battery Tester Review: Measuring Capacity and Internal Resistance", "url": "https://www.tastethecode.com/18650-battery-tester-review-measuring-capacity-and-internal-resistance", "published_at": "2026-03-28T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d535990d", "title": "Diagnosing and Repairing a SANKEI TCR95 Studio Mixer from the 80s", "url": "https://www.tastethecode.com/diagnosing-and-repairing-a-sankei-tcr95-studio-mixer-from-the-80s", "published_at": "2026-03-20T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d5459492", "title": "Full Electrical Isolation for Your ESP32 Power Switch Using an Optocoupler", "url": "https://www.tastethecode.com/full-electrical-isolation-for-your-esp32-power-switch-using-an-optocoupler", "published_at": "2026-03-13T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d55f4c01", "title": "Inside a Plasma Ball: Testing, Replacing, and Learning from Failure", "url": "https://www.tastethecode.com/inside-a-plasma-ball-testing-replacing-and-learning-from-failure", "published_at": "2026-02-21T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d5dfbc4a", "title": "Building a Simple Indoor Asset Tracking System With RYUW122_DK", "url": "https://www.tastethecode.com/building-a-simple-indoor-asset-tracking-system-with-ryuw122-dk", "published_at": "2026-01-30T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d68e643d", "title": "Touch Control Made Easy: A Beginner's Guide to TTP223 Sensors and ESP32 Touch Pins", "url": "https://www.tastethecode.com/touch-control-made-easy-a-beginner-s-guide-to-ttp223-sensors-and-esp32-touch-pins", "published_at": "2026-01-24T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d6ff1e6c", "title": "How I Fixed a Broken Charging Port by Upgrading the Speakers to USB-C", "url": "https://www.tastethecode.com/how-i-fixed-a-broken-charging-port-by-upgrading-the-speakers-to-usb-c", "published_at": "2026-01-16T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d7648fc8", "title": "Building a Field Power Kit: Pairing the PocketPD with a DIY Battery Adapter", "url": "https://www.tastethecode.com/building-a-field-power-kit-pairing-the-pocketpd-with-a-diy-battery-adapter", "published_at": "2025-12-30T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d802407c", "title": "Meshtastic N39 GPS Tracker: Assembly, Setup, and a Real-Life Rescue Simulation", "url": "https://www.tastethecode.com/meshtastic-n39-gps-tracker-assembly-setup-and-a-real-life-rescue-simulation", "published_at": "2025-12-23T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d8738b07", "title": "Sensor Power Switch Using an ESP32 and P-Channel MOSFET", "url": "https://www.tastethecode.com/sensor-power-switch-using-an-esp32-and-p-channel-mosfet", "published_at": "2025-12-14T08:12:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872d91fc59e", "title": "How Much Distance You Can Actually Get From an nRF24L01", "url": "https://www.tastethecode.com/how-much-distance-you-can-actually-get-from-an-nrf24l01", "published_at": "2025-12-08T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872da06dd0e", "title": "Building a Real-Time LoRaWAN Class C Relay Controller Using the ESP LoRa 32", "url": "https://www.tastethecode.com/building-a-real-time-lorawan-class-c-relay-controller-using-the-esp-lora-32", "published_at": "2025-11-29T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872da7e639b", "title": "How to Build a Smart Keypad Access System with an ESP32 (EEmentor Kit Review)", "url": "https://www.tastethecode.com/how-to-build-a-smart-keypad-access-system-with-an-esp32-eementor-kit-review", "published_at": "2025-11-22T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872db603415", "title": "Replacing a Broken AC Wi-Fi Module with an ESPHome IR Bridge", "url": "https://www.tastethecode.com/replacing-a-broken-ac-wi-fi-module-with-an-esphome-ir-bridge", "published_at": "2025-11-15T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872dbfb5251", "title": "Building a LoRaWAN Class A Sensor Node with ESP8266, BME680, and RYLR993", "url": "https://www.tastethecode.com/building-a-lorawan-class-a-sensor-node-with-esp8266-bme680-and-rylr993", "published_at": "2025-11-09T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872dc5d3169", "title": "A Step-by-Step Guide to Testing LoRaWAN Gateway Connectivity", "url": "https://www.tastethecode.com/a-step-by-step-guide-to-testing-lorawan-gateway-connectivity", "published_at": "2025-10-28T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872dd3131bd", "title": "How I Fixed a Dead Panasonic TV for Less Than $15", "url": "https://www.tastethecode.com/how-i-fixed-a-dead-panasonic-tv-for-less-than-15", "published_at": "2025-10-25T13:56:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872ddf62701", "title": "Testing the TOOCAA L2 Laser Cutter with a Custom WLED Wall Sign Project", "url": "https://www.tastethecode.com/testing-the-toocaa-l2-laser-cutter-with-a-custom-wled-wall-sign-project", "published_at": "2025-10-17T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872de2e751e", "title": "Hands-On With Meross Smart Sensors: Presence, Water Leaks, and Sprinkler Control", "url": "https://www.tastethecode.com/hands-on-with-meross-smart-sensors-presence-water-leaks-and-sprinkler-control", "published_at": "2025-09-26T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872df257477", "title": "Turning a Cereal Box into a 3D Printer Filament Dryer", "url": "https://www.tastethecode.com/turning-a-cereal-box-into-a-3d-printer-filament-dryer", "published_at": "2025-09-19T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872dfea3094", "title": "How to Build a Meshtastic Node: A Hands-On Review of Meshnology's N30 and N32 Kits", "url": "https://www.tastethecode.com/how-to-build-a-meshtastic-node-hands-on-review-of-meshnology-s-n30-and-n32-kits", "published_at": "2025-09-11T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e03b19ef", "title": "ZBDongle-E Setup: Adding Thread & Matter Support to Home Assistant", "url": "https://www.tastethecode.com/zbdongle-e-setup-adding-thread-matter-support-to-home-assistant", "published_at": "2025-08-31T11:57:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e1141bc1", "title": "Exploring ESP-NOW: Wireless Communication Between ESP32 Modules", "url": "https://www.tastethecode.com/exploring-esp-now-wireless-communication-between-esp32-modules", "published_at": "2025-08-15T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e1869020", "title": "How I Save Data on the ESP32 – Even After Powering It Off", "url": "https://www.tastethecode.com/how-i-save-data-on-the-esp32-even-after-powering-it-off", "published_at": "2025-08-02T12:22:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e1d73aa1", "title": "Building a Bluetooth to LoRa Gateway for Emergency Communication", "url": "https://www.tastethecode.com/building-a-bluetooth-to-lora-gateway-for-emergency-communication", "published_at": "2025-07-25T09:45:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e27406a3", "title": "Edge Lit Acrylic Night Lamp with 3D Printed Base and Custom PCB", "url": "https://www.tastethecode.com/edge-lit-acrylic-night-lamp-with-3d-printed-base-and-custom-pcb", "published_at": "2025-07-09T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e2adddad", "title": "Home Assistant-Controlled LED Light with a 3D Printed Base", "url": "https://www.tastethecode.com/home-assistant-controlled-led-light-with-a-3d-printed-base", "published_at": "2025-06-26T11:59:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e372a03d", "title": "Zigbee Switch Hack: Automate Unrelated Lights with Home Assistant", "url": "https://www.tastethecode.com/zigbee-switch-hack-automate-unrelated-lights-with-home-assistant", "published_at": "2025-06-06T09:49:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e42f4a68", "title": "DIY Custom PCB in Altium for Edge-Lit Acrylic Signs", "url": "https://www.tastethecode.com/diy-custom-pcb-in-altium-for-edge-lit-acrylic-signs", "published_at": "2025-05-30T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e51892a3", "title": "How to Build a Multi-Voltage Power Supply for Your Electronics Workshop", "url": "https://www.tastethecode.com/how-to-build-a-multi-voltage-power-supply-for-your-electronics-workshop", "published_at": "2025-05-17T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e570395c", "title": "Modbus RS485 Wind Speed Sensor to Arduino", "url": "https://www.tastethecode.com/modbus-rs485-wind-speed-sensor-to-arduino", "published_at": "2025-05-10T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e5aa1bb6", "title": "Hands-On Review: Elecrow’s Arduino Kit for Absolute Beginners", "url": "https://www.tastethecode.com/hands-on-review-elecrow-arduino-kit-for-absolute-beginners", "published_at": "2025-04-30T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e6353d72", "title": "Power Bank from Scratch with 18650 batteries and LX-LBU2C", "url": "https://www.tastethecode.com/power-bank-from-scratch-with-18650-batteries-and-lx-lbu2c", "published_at": "2025-04-26T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e6cccfad", "title": "Cloud-Controlled DIY Devices Without Coding - KME Smart", "url": "https://www.tastethecode.com/cloud-controlled-diy-devices-without-coding-kme-smart", "published_at": "2025-04-19T06:30:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e7a01179", "title": "RYB2340 - Add Bluetooth to ANY Project in Minutes!", "url": "https://www.tastethecode.com/ryb2340-add-bluetooth-to-any-project-in-minutes", "published_at": "2025-04-14T19:56:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e825e645", "title": "Smart Home Dashboard with ESPHome and CrowPanel HMI Advanced Screen", "url": "https://www.tastethecode.com/smart-home-dashboard-with-esphome-and-crowpanel-hmi-advanced-screen", "published_at": "2025-04-04T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e88c14b7", "title": "Making a PCB with a laser engraver - ACMER S1 Review", "url": "https://www.tastethecode.com/making-a-pcb-with-a-laser-engraver-acmer-s1-review", "published_at": "2025-03-26T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e914480c", "title": "Gridfinity: The Perfect 3D Printed Storage System for Your Desk", "url": "https://www.tastethecode.com/gridfinity-the-perfect-3d-printed-storage-system-for-your-desk", "published_at": "2025-03-21T00:00:00+00:00" }, { "id": "01a087e9-b1e9-7060-a655-0872e9916a06", "title": "Setting up Zigbee Dongle on Home Assistant in a Proxmox VM", "url": "https://www.tastethecode.com/setting-up-zigbee-dongle-on-home-assistant-in-a-proxmox-vm", "published_at": "2025-03-14T13:08:00+00:00" } ] posts Claim your blog
Back to tastethecode.com
Blog · corpus.blog/blogs/tastethecode.com/posts

tastethecode.com

tastethecode.com

2026

How I Repaired a Dead Mitsubishi Colt Dashboard Displayoriginal ↗
25 Sept 2026
Inside the SLZB Ultima: Radios, Add-On Modules and IO Pinsoriginal ↗
13 Sept 2026
FNIRSI LPM-10 Review: Testing Every Function of This Network Cable Testeroriginal ↗
5 Sept 2026
Building a Standalone RFID Door Lock with the RC522 and an ESP32original ↗
31 Aug 2026
Monitoring Temperature, Humidity and Air Quality with the BME680original ↗
15 Aug 2026
Repairing a Weather Station Without Replacing Partsoriginal ↗
29 Jul 2026
Flashing and Configuring ESP Claw on UNIHIKER K10 ESP32-S3 Boardoriginal ↗
20 Jul 2026
DIY Multi-Zone Drip Irrigation with Tasmota and an Isolated Relay Boardoriginal ↗
12 Jun 2026
Building a Smart Pellet Stove Monitor with HC-SR04, ESP8266 and Tasmotaoriginal ↗
31 May 2026
Using OpenPLC to Run Industrial Control Logic on an Arduino Unooriginal ↗
22 May 2026
How I Built a DIY Bench Power Supply Enclosure with the Longer B1 Laseroriginal ↗
15 May 2026
Disposable Vape Teardown: Free 850mAh Battery, USB-C Charger and a Tiny Displayoriginal ↗
25 Apr 2026
DM9 Digital Microscope Unboxing, Setup, and First PCB Testsoriginal ↗
22 Apr 2026
18650 Battery Tester Review: Measuring Capacity and Internal Resistanceoriginal ↗
28 Mar 2026
Diagnosing and Repairing a SANKEI TCR95 Studio Mixer from the 80soriginal ↗
20 Mar 2026
Full Electrical Isolation for Your ESP32 Power Switch Using an Optocoupleroriginal ↗
13 Mar 2026
Inside a Plasma Ball: Testing, Replacing, and Learning from Failureoriginal ↗
21 Feb 2026
Building a Simple Indoor Asset Tracking System With RYUW122_DKoriginal ↗
30 Jan 2026
Touch Control Made Easy: A Beginner's Guide to TTP223 Sensors and ESP32 Touch Pinsoriginal ↗
24 Jan 2026
How I Fixed a Broken Charging Port by Upgrading the Speakers to USB-Coriginal ↗
16 Jan 2026

2025

Building a Field Power Kit: Pairing the PocketPD with a DIY Battery Adapteroriginal ↗
30 Dec 2025
Meshtastic N39 GPS Tracker: Assembly, Setup, and a Real-Life Rescue Simulationoriginal ↗
23 Dec 2025
Sensor Power Switch Using an ESP32 and P-Channel MOSFEToriginal ↗
14 Dec 2025
How Much Distance You Can Actually Get From an nRF24L01original ↗
8 Dec 2025
Building a Real-Time LoRaWAN Class C Relay Controller Using the ESP LoRa 32original ↗
29 Nov 2025
How to Build a Smart Keypad Access System with an ESP32 (EEmentor Kit Review)original ↗
22 Nov 2025
Replacing a Broken AC Wi-Fi Module with an ESPHome IR Bridgeoriginal ↗
15 Nov 2025
Building a LoRaWAN Class A Sensor Node with ESP8266, BME680, and RYLR993original ↗
9 Nov 2025
A Step-by-Step Guide to Testing LoRaWAN Gateway Connectivityoriginal ↗
28 Oct 2025
How I Fixed a Dead Panasonic TV for Less Than $15original ↗
25 Oct 2025
Testing the TOOCAA L2 Laser Cutter with a Custom WLED Wall Sign Projectoriginal ↗
17 Oct 2025
Hands-On With Meross Smart Sensors: Presence, Water Leaks, and Sprinkler Controloriginal ↗
26 Sept 2025
Turning a Cereal Box into a 3D Printer Filament Dryeroriginal ↗
19 Sept 2025
How to Build a Meshtastic Node: A Hands-On Review of Meshnology's N30 and N32 Kitsoriginal ↗
11 Sept 2025
ZBDongle-E Setup: Adding Thread & Matter Support to Home Assistantoriginal ↗
31 Aug 2025
Exploring ESP-NOW: Wireless Communication Between ESP32 Modulesoriginal ↗
15 Aug 2025
How I Save Data on the ESP32 – Even After Powering It Offoriginal ↗
2 Aug 2025
Building a Bluetooth to LoRa Gateway for Emergency Communicationoriginal ↗
25 Jul 2025
Edge Lit Acrylic Night Lamp with 3D Printed Base and Custom PCBoriginal ↗
9 Jul 2025
Home Assistant-Controlled LED Light with a 3D Printed Baseoriginal ↗
26 Jun 2025
Zigbee Switch Hack: Automate Unrelated Lights with Home Assistantoriginal ↗
6 Jun 2025
DIY Custom PCB in Altium for Edge-Lit Acrylic Signsoriginal ↗
30 May 2025
How to Build a Multi-Voltage Power Supply for Your Electronics Workshoporiginal ↗
17 May 2025
Modbus RS485 Wind Speed Sensor to Arduinooriginal ↗
10 May 2025
Hands-On Review: Elecrow’s Arduino Kit for Absolute Beginnersoriginal ↗
30 Apr 2025
Power Bank from Scratch with 18650 batteries and LX-LBU2Coriginal ↗
26 Apr 2025
Cloud-Controlled DIY Devices Without Coding - KME Smartoriginal ↗
19 Apr 2025
RYB2340 - Add Bluetooth to ANY Project in Minutes!original ↗
14 Apr 2025
Smart Home Dashboard with ESPHome and CrowPanel HMI Advanced Screenoriginal ↗
4 Apr 2025
Making a PCB with a laser engraver - ACMER S1 Revieworiginal ↗
26 Mar 2025
Gridfinity: The Perfect 3D Printed Storage System for Your Deskoriginal ↗
21 Mar 2025
Setting up Zigbee Dongle on Home Assistant in a Proxmox VMoriginal ↗
14 Mar 2025