corpus.blog
41554 blogs · [ { "id": "01a087e2-5d74-71f9-bd60-b797cdc78328", "title": "TinyPLL", "url": "https://sm6vfz.wordpress.com/2026/03/16/tinypll/", "published_at": "2026-03-15T22:17:55+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797ce37130c", "title": "QUCS as AppImage", "url": "https://sm6vfz.wordpress.com/2024/02/15/qucs-as-appimage/", "published_at": "2024-02-15T08:38:29+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797cecaac43", "title": "Building and running WSJT-X in a Docker container", "url": "https://sm6vfz.wordpress.com/2023/07/10/building-and-running-wsjt-x-in-a-docker-container/", "published_at": "2023-07-10T17:17:30+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797cefd10a2", "title": "150 MHz frequency counter with ATtiny817..", "url": "https://sm6vfz.wordpress.com/2022/10/10/150-mhz-frequency-counter-with-attiny817/", "published_at": "2022-10-09T22:14:42+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797cfe58740", "title": "How to enable I2S on Raspberry Pi..", "url": "https://sm6vfz.wordpress.com/2021/12/09/how-to-enable-i2s-on-raspberry-pi/", "published_at": "2021-12-09T15:59:43+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797cfea11b8", "title": "RX/TX-Sequencer with 28V relay driver", "url": "https://sm6vfz.wordpress.com/2021/07/14/rx-tx-sequencer-with-28v-relay-driver/", "published_at": "2021-07-14T10:14:47+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797d002b0a1", "title": "Boost regulator with ATtiny", "url": "https://sm6vfz.wordpress.com/2020/12/11/boost-regulator-with-attiny/", "published_at": "2020-12-11T13:01:40+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797d0b2ac32", "title": "When to use dB and when to use dBm", "url": "https://sm6vfz.wordpress.com/2020/10/02/when-to-use-db-and-when-to-use-dbm/", "published_at": "2020-10-02T19:08:46+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797d0ec0c73", "title": "PLL / Frequency synthesis with Programmeable Logic", "url": "https://sm6vfz.wordpress.com/2020/08/21/pll-frequency-synthesis-with-programmeable-logic/", "published_at": "2020-08-21T12:08:19+00:00" }, { "id": "01a087e2-5d74-71f9-bd60-b797d1176b1f", "title": "Update to 10 GHz quadrupler", "url": "https://sm6vfz.wordpress.com/2020/04/22/update-to-10-ghz-quadrupler/", "published_at": "2020-04-22T09:16:39+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3535aff182", "title": "Rotor Control for SPID antenna rotators", "url": "https://sm6vfz.wordpress.com/2019/12/01/rotor-control-for-spid-antenna-rotators/", "published_at": "2019-12-01T17:03:18+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3536922bf3", "title": "IC-7000 short term frequency stabilization", "url": "https://sm6vfz.wordpress.com/2019/11/16/ic-7000-short-term-frequency-stabilization/", "published_at": "2019-11-16T21:55:41+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3536931fba", "title": "Tuja SDR transceiver", "url": "https://sm6vfz.wordpress.com/2018/12/05/tuja-sdr-transceiver/", "published_at": "2018-12-05T16:11:23+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b35374190f0", "title": "“The Signal Path”", "url": "https://sm6vfz.wordpress.com/2018/08/10/the-signal-path/", "published_at": "2018-08-10T08:42:30+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3537ca859c", "title": "80/40 dB amplifier", "url": "https://sm6vfz.wordpress.com/2017/07/16/8040-db-amplifier/", "published_at": "2017-07-16T12:29:27+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b35387ab996", "title": "FPGA-DSP Board in Elektor", "url": "https://sm6vfz.wordpress.com/2017/06/20/fpga-dsp-board-in-elektor/", "published_at": "2017-06-20T19:08:37+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b353881a373", "title": "New PLL/LO board", "url": "https://sm6vfz.wordpress.com/2017/04/27/new-plllo-board/", "published_at": "2017-04-27T18:29:26+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b35396a8d09", "title": "144 MHz RF board", "url": "https://sm6vfz.wordpress.com/2017/01/29/144-mhz-rf-board/", "published_at": "2017-01-29T13:22:12+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3539a97389", "title": "Baofeng UV-5R spectrum", "url": "https://sm6vfz.wordpress.com/2016/11/11/baofeng-uv-5r-spectrum/", "published_at": "2016-11-11T18:32:14+00:00" }, { "id": "01a0d088-cb6e-71e7-8f74-7b3539b23e1e", "title": "5W Driver PA for 1296 MHz / 23cm", "url": "https://sm6vfz.wordpress.com/2016/08/20/5w-driver-pa-for-1296-mhz-23cm/", "published_at": "2016-08-20T10:23:45+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f91bc6dfd", "title": "Measurements on PLL board mkII", "url": "https://sm6vfz.wordpress.com/2016/05/21/measurements-on-pll-board-mkii/", "published_at": "2016-05-21T18:37:22+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f926e7367", "title": "Preamp with PGA-103+ for 1296 MHz", "url": "https://sm6vfz.wordpress.com/2016/05/13/preamp-with-pga-103-for-1296-mhz/", "published_at": "2016-05-13T20:57:24+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f92c7cd67", "title": "Chinese kit for 100W at 144MHz", "url": "https://sm6vfz.wordpress.com/2015/10/06/chinese-kit-for-100w-at-144mhz/", "published_at": "2015-10-06T12:05:05+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f9379069b", "title": "FET Multiplier for 10-12 GHz", "url": "https://sm6vfz.wordpress.com/2015/09/25/fet-multiplier-for-10-12-ghz/", "published_at": "2015-09-25T18:59:03+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f946032dd", "title": "DSP/SDR with FPGA for narrow band communications", "url": "https://sm6vfz.wordpress.com/2015/09/05/dspsdr-with-fpga-for-narrow-band-communications/", "published_at": "2015-09-05T17:11:50+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f9524176f", "title": "5 GHz WiFi PA for the 6cm amateur band", "url": "https://sm6vfz.wordpress.com/2015/08/17/5-7-ghz-wifi-pa-for-the-6cm-amateur-band/", "published_at": "2015-08-17T20:33:14+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f9601cf33", "title": "PLL Frequency Synthesizer Mk 2", "url": "https://sm6vfz.wordpress.com/2015/08/17/pll-frequency-synthesizer-mk-2/", "published_at": "2015-08-17T19:22:29+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f96cc46ba", "title": "ESD and Noise Figure", "url": "https://sm6vfz.wordpress.com/2015/08/13/esd-and-noise-figure/", "published_at": "2015-08-13T14:35:55+00:00" }, { "id": "01a0d089-4029-719e-8c49-6f5f97215c72", "title": "Hello world!", "url": "https://sm6vfz.wordpress.com/2015/08/12/hello-world/", "published_at": "2015-08-12T20:33:35+00:00" } ] posts Claim your blog
Back to sm6vfz.wordpress.com
Blog · corpus.blog/blogs/sm6vfz.wordpress.com/posts

sm6vfz.wordpress.com

sm6vfz.wordpress.com

2026

TinyPLLoriginal ↗
15 Mar 2026

2024

QUCS as AppImageoriginal ↗
15 Feb 2024

2023

Building and running WSJT-X in a Docker containeroriginal ↗
10 Jul 2023

2022

150 MHz frequency counter with ATtiny817..original ↗
9 Oct 2022

2021

How to enable I2S on Raspberry Pi..original ↗
9 Dec 2021
RX/TX-Sequencer with 28V relay driveroriginal ↗
14 Jul 2021

2020

Boost regulator with ATtinyoriginal ↗
11 Dec 2020
When to use dB and when to use dBmoriginal ↗
2 Oct 2020
PLL / Frequency synthesis with Programmeable Logicoriginal ↗
21 Aug 2020
Update to 10 GHz quadrupleroriginal ↗
22 Apr 2020

2019

Rotor Control for SPID antenna rotatorsoriginal ↗
1 Dec 2019
IC-7000 short term frequency stabilizationoriginal ↗
16 Nov 2019

2018

Tuja SDR transceiveroriginal ↗
5 Dec 2018
“The Signal Path”original ↗
10 Aug 2018

2017

80/40 dB amplifieroriginal ↗
16 Jul 2017
FPGA-DSP Board in Elektororiginal ↗
20 Jun 2017
New PLL/LO boardoriginal ↗
27 Apr 2017
144 MHz RF boardoriginal ↗
29 Jan 2017

2016

Baofeng UV-5R spectrumoriginal ↗
11 Nov 2016
5W Driver PA for 1296 MHz / 23cmoriginal ↗
20 Aug 2016
Measurements on PLL board mkIIoriginal ↗
21 May 2016
Preamp with PGA-103+ for 1296 MHzoriginal ↗
13 May 2016

2015

Chinese kit for 100W at 144MHzoriginal ↗
6 Oct 2015
FET Multiplier for 10-12 GHzoriginal ↗
25 Sept 2015
DSP/SDR with FPGA for narrow band communicationsoriginal ↗
5 Sept 2015
5 GHz WiFi PA for the 6cm amateur bandoriginal ↗
17 Aug 2015
PLL Frequency Synthesizer Mk 2original ↗
17 Aug 2015
ESD and Noise Figureoriginal ↗
13 Aug 2015
Hello world!original ↗
12 Aug 2015