corpus.blog
56,966 blogs · [ { "id": "01a087da-1071-734e-b830-9154ded3dbb7", "title": "Ye Olde Out of Office: Building a 7.5″ Bayeux Tapestry E-Paper Status Sign", "url": "https://www.sabulo.com/sb/uncategorized/ye-olde-out-of-office-building-a-7-5-bayeux-tapestry-e-paper-status-sign/", "published_at": "2026-06-10T07:42:38+00:00" }, { "id": "01a087da-1071-734e-b830-9154df5007fb", "title": "ESP32 MPY-Jama, an excellent IDE for using Python on ESP32", "url": "https://www.sabulo.com/sb/esp32-development-board/esp32-mpy-jama-an-excellent-ide-for-using-python-on-esp32/", "published_at": "2024-05-17T06:23:37+00:00" }, { "id": "01a087da-1072-714a-9f6e-e9253f9ff2f9", "title": "Revising the ESP32 Spotify Display with ChatGPT", "url": "https://www.sabulo.com/sb/esp32-development-board/revising-the-esp32-spotify-display-with-chatgpt/", "published_at": "2024-02-10T07:39:56+00:00" }, { "id": "01a087da-1072-714a-9f6e-e92540081b1f", "title": "Restarting an ESP32 via Telegram", "url": "https://www.sabulo.com/sb/esp32-development-board/restarting-an-esp32-via-telegram/", "published_at": "2023-04-20T09:41:04+00:00" }, { "id": "01a087da-1072-714a-9f6e-e92540f5894e", "title": "GPS-equipped portable atmospheric recorder, with LCD and map display", "url": "https://www.sabulo.com/sb/esp32-development-board/gps-equipped-portable-atmospheric-recorder-with-lcd-and-map-display/", "published_at": "2022-04-27T10:01:16+00:00" }, { "id": "01a087da-1072-714a-9f6e-e9254196e4ae", "title": "Spotify song display with ESP32 and e-paper display", "url": "https://www.sabulo.com/sb/3d-printing-2/spotify-song-display-with-esp32-and-e-paper-display/", "published_at": "2022-04-18T11:51:57+00:00" }, { "id": "01a087da-1072-714a-9f6e-e9254203c5ca", "title": "Time Management Cube", "url": "https://www.sabulo.com/sb/accelerometer/time-management-cube/", "published_at": "2022-04-04T10:31:35+00:00" }, { "id": "01a087da-1072-714a-9f6e-e92542215a22", "title": "Video insert length indicator with large LED segment displays and ESP32", "url": "https://www.sabulo.com/sb/3d-printing-2/video-insert-length-indicator-with-large-led-segment-displays-and-esp32/", "published_at": "2021-11-05T16:15:44+00:00" }, { "id": "01a087da-1072-714a-9f6e-e925426a1788", "title": "Humidity and temperature data on IoT", "url": "https://www.sabulo.com/sb/arduino/humidity-and-temperature-data-on-iot/", "published_at": "2021-03-30T05:10:49+00:00" }, { "id": "01a087da-1072-714a-9f6e-e9254314b2d3", "title": "Home made large 7 segment LED display", "url": "https://www.sabulo.com/sb/arduino/home-made-large-7-segment-led-display/", "published_at": "2020-12-18T16:54:45+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0b90ade0", "title": "Back in business with the Seeedstudio Grove Arduino kit", "url": "https://www.sabulo.com/sb/arduino/back-in-business-with-the-seeedstudio-grove-arduino-kit/", "published_at": "2020-08-14T15:26:09+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0b91698c", "title": "Documentation images for the Kotokino Mark IV scanner", "url": "https://www.sabulo.com/sb/8mm-film/documentation-images-for-the-kotokino-mark-iv-scanner/", "published_at": "2020-05-18T11:18:21+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0bd834f7", "title": "The Donald Duck hypnotizing machine with IoT", "url": "https://www.sabulo.com/sb/3d-printing-2/the-donald-duck-hypnotizing-machine-with-iot/", "published_at": "2020-05-07T08:21:52+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0c3e692c", "title": "Using the UDP protocol with an ESP32 and Android Studio, Part 4", "url": "https://www.sabulo.com/sb/esp32-development-board/using-the-udp-protocol-with-an-esp32-and-android-studio-part-4/", "published_at": "2020-04-28T08:32:34+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0c4610bb", "title": "Using the UDP protocol with an ESP32 and Android Studio, Part 3", "url": "https://www.sabulo.com/sb/esp32-development-board/using-the-udp-protocol-with-an-esp32-and-android-studio-part-3/", "published_at": "2020-04-27T07:18:01+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0ca4f23b", "title": "Using 7 Segment LED displays, Part 4 – dual quadruple units", "url": "https://www.sabulo.com/sb/led/using-7-segment-led-displays-part-4-dual-quadruple-units/", "published_at": "2020-04-21T06:04:23+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0d4924c2", "title": "Using 7 Segment LED displays, Part 3", "url": "https://www.sabulo.com/sb/arduino/using-7-segment-led-displays-part-3/", "published_at": "2020-04-17T07:40:49+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0e37cab9", "title": "Using the UDP protocol with an ESP32 and Android Studio, Part 2", "url": "https://www.sabulo.com/sb/esp32-development-board/using-the-udp-protocol-with-an-esp32-and-android-studio-part-2/", "published_at": "2020-04-17T06:24:19+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0ee81f30", "title": "How to use the Heltec OLED display on the ESP32", "url": "https://www.sabulo.com/sb/esp32-development-board/how-to-use-the-heltec-oled-display-on-the-esp32/", "published_at": "2020-04-16T10:21:46+00:00" }, { "id": "01a0bdfb-3d49-7240-a057-fd9a0f0e52e2", "title": "Using the UDP protocol with an ESP32 and Android Studio, Part 1", "url": "https://www.sabulo.com/sb/esp32-development-board/using-the-udp-protocol-with-an-esp32-and-android-studio-part-1/", "published_at": "2020-04-08T09:53:05+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4b5b9bcb", "title": "8mm film scanner Kotokino Mark IV", "url": "https://www.sabulo.com/sb/3d-printing-2/8mm-film-scanner-kotokino-mark-iv/", "published_at": "2020-03-31T06:25:07+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4c3c25be", "title": "The all new 3D + Robo Lab", "url": "https://www.sabulo.com/sb/3d-printing-2/the-all-new-3d-robo-lab/", "published_at": "2020-02-11T06:11:27+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4d1a3012", "title": "Interlude – LED Segment calculator", "url": "https://www.sabulo.com/sb/excel/interlude-led-segment-calculator/", "published_at": "2019-09-07T07:25:18+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4d76cda2", "title": "Using 7 Segment LED displays, Part 2", "url": "https://www.sabulo.com/sb/excel/using-7-segment-led-displays-part-2/", "published_at": "2019-09-03T08:33:42+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4ded2ccf", "title": "Using 7 Segment LED displays, Part 1", "url": "https://www.sabulo.com/sb/arduino/using-7-segment-led-displays-part-1/", "published_at": "2019-08-21T12:44:11+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4eb3c994", "title": "Low cost, low impact queue monitoring system", "url": "https://www.sabulo.com/sb/3d-printing-2/low-cost-low-impact-queue-monitoring-system/", "published_at": "2019-04-12T14:40:25+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4ee71ea9", "title": "8mm Film Scanner, final version with Canon 1000D", "url": "https://www.sabulo.com/sb/3d-printing-2/8mm-film-scanner-final-version-with-canon-1000d/", "published_at": "2019-01-23T06:02:38+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4f38538f", "title": "How to enter the Internet of Things", "url": "https://www.sabulo.com/sb/3d-printing-2/how-to-enter-the-internet-of-things/", "published_at": "2018-12-13T12:51:07+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a4f76b395", "title": "Moving on from Arduino to ESP32 – Part 3, uPyCraft and Blink", "url": "https://www.sabulo.com/sb/arduino/moving-on-from-arduino-to-esp32-part-3-upycraft-and-blink/", "published_at": "2018-11-20T14:52:39+00:00" }, { "id": "01a0be05-8e29-725c-bac5-848a506b38b9", "title": "Moving on from Arduino to ESP32 – Part 2, MicroPython", "url": "https://www.sabulo.com/sb/arduino/moving-on-from-arduino-to-esp32-part-2-micropython/", "published_at": "2018-10-03T07:45:52+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f06292ea", "title": "Moving on from Arduino to ESP32 – Part 1", "url": "https://www.sabulo.com/sb/arduino/moving-on-from-arduino-to-esp32-part1/", "published_at": "2018-09-27T12:53:43+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f0b48d03", "title": "An official stamp for the 3D Lab", "url": "https://www.sabulo.com/sb/3d-printing-2/an-official-stamp-for-the-3d-lab/", "published_at": "2018-09-17T13:29:22+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f0d0446a", "title": "Season Finale – crafting a replacement part", "url": "https://www.sabulo.com/sb/3d-printing-2/season-finale-crafting-a-replacement-part/", "published_at": "2018-05-30T10:10:16+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f1500f96", "title": "ESP32 – Arduino on Steroids", "url": "https://www.sabulo.com/sb/arduino/esp32-arduino-on-steroids/", "published_at": "2018-05-22T15:36:17+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f22d72b4", "title": "The Morse Moai statue project", "url": "https://www.sabulo.com/sb/3d-printing-2/the-morse-moai-statue-project/", "published_at": "2018-03-01T12:56:45+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f323697d", "title": "Finding rotation speed using Arduino", "url": "https://www.sabulo.com/sb/3d-printing-2/finding-rotation-speed-using-arduino/", "published_at": "2018-02-08T05:31:16+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f36cc519", "title": "Accelerometer, that tiny workhorse", "url": "https://www.sabulo.com/sb/blender/accelerometer-that-tiny-workhorse/", "published_at": "2017-11-29T10:08:26+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f3c85932", "title": "Proof of concept: servo speed and rotation", "url": "https://www.sabulo.com/sb/blender/proof-of-concept-servo-speed-and-rotation/", "published_at": "2017-10-13T09:17:45+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f3ff8c73", "title": "Introducing 8mm Scanner v2.0", "url": "https://www.sabulo.com/sb/3d-printing-2/introducing-8mm-scanner-v2-0/", "published_at": "2017-09-27T16:35:56+00:00" }, { "id": "01a0be0d-bda1-71b9-86cf-5085f45fc03a", "title": "Wrapping up academic year 2016-17", "url": "https://www.sabulo.com/sb/uncategorized/wrapping-up-academic-year-2016-17/", "published_at": "2017-05-28T13:53:18+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235cf4aff75", "title": "An exciting product launch on metal printing", "url": "https://www.sabulo.com/sb/metal-printing/an-exciting-product-launch-on-metal-printing/", "published_at": "2017-04-21T07:55:20+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d0325988", "title": "Single input, multiple output power source for a variety of needs", "url": "https://www.sabulo.com/sb/8mm-film/single-input-multiple-output-power-source-for-a-variety-of-needs/", "published_at": "2017-04-12T17:08:16+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d03fc3fc", "title": "Assembling a CoLiDo DIY 3D printer, part 1", "url": "https://www.sabulo.com/sb/3d-printing-2/assembling-a-colido-diy-3d-printer-part-1/", "published_at": "2017-03-31T13:40:27+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d110404f", "title": "Fantastic tool for metal printing", "url": "https://www.sabulo.com/sb/3d-printing-2/fantastic-tool-for-metal-printing/", "published_at": "2017-03-13T10:56:15+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d1aaf66c", "title": "Quick prints for everyday issues", "url": "https://www.sabulo.com/sb/3d-printing-2/quick-prints-for-everyday-issues/", "published_at": "2017-01-18T11:00:24+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d2112e72", "title": "New, improved 3D Lab at Haaga-Helia", "url": "https://www.sabulo.com/sb/3d-printing-2/new-improved-3d-lab-at-haaga-helia/", "published_at": "2017-01-13T16:00:40+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d230a0a1", "title": "I been Slush’d", "url": "https://www.sabulo.com/sb/slush-2016/i-been-slushd/", "published_at": "2016-12-01T06:35:41+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d2e29db6", "title": "A lecture on 3D and my University", "url": "https://www.sabulo.com/sb/3d-printing-2/a-lecture-on-3d-and-my-university/", "published_at": "2016-10-30T15:31:59+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d3468aa1", "title": "Building a 2 way tiltable webcam stand, part 2", "url": "https://www.sabulo.com/sb/3d-printing-2/building-a-2-way-tiltable-webcam-stand-part-2/", "published_at": "2016-10-12T10:14:04+00:00" }, { "id": "01a0dd04-fa79-71da-ad0a-7235d3968f05", "title": "Building a 2 way tiltable webcam stand", "url": "https://www.sabulo.com/sb/3d-printing-2/building-a-2-way-tiltable-webcam-stand/", "published_at": "2016-09-26T10:40:58+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3208f66acc4", "title": "Troubleshooting Arduino problems related to power", "url": "https://www.sabulo.com/sb/hacking/troubleshooting-arduino-problems-related-to-power/", "published_at": "2016-09-16T09:33:00+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3208fda50fe", "title": "Your first Blender game, part 2", "url": "https://www.sabulo.com/sb/blender/your-first-blender-game-part-2/", "published_at": "2016-05-03T12:13:49+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3209083be81", "title": "Visiting Ypres, and high tech in museums", "url": "https://www.sabulo.com/sb/museums/visiting-ypres-and-high-tech-in-museums/", "published_at": "2016-04-25T15:30:02+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3209098551a", "title": "Your first Blender game in 15 minutes", "url": "https://www.sabulo.com/sb/blender/your-first-blender-game-in-15-minutes/", "published_at": "2016-04-15T11:52:18+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f32090b87126", "title": "3D printed food is here", "url": "https://www.sabulo.com/sb/3d-printing-2/3d-printed-food-is-here/", "published_at": "2016-03-30T08:50:43+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f32091a10588", "title": "The most cost-effective internationalization method", "url": "https://www.sabulo.com/sb/haaga-helia/the-most-cost-effective-internationalization-method/", "published_at": "2016-03-29T08:03:35+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3209216ba2b", "title": "The 8mm film scanner (Telecine) project, part 5 – Programming", "url": "https://www.sabulo.com/sb/blender/the-8mm-film-scanner-telecine-project-part-5-programming/", "published_at": "2016-02-21T16:51:28+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f320926b7a1b", "title": "The 8mm film scanner (Telecine) project, part 4 – Arduino", "url": "https://www.sabulo.com/sb/8mm-film/the-8mm-film-scanner-telecine-project-part-4-arduino/", "published_at": "2016-01-31T10:11:08+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f320930fcd9d", "title": "The 8mm film scanner (Telecine) project, part 3 – Printed parts", "url": "https://www.sabulo.com/sb/3d-printing-2/the-8mm-film-scanner-telecine-project-part-3-printed-parts/", "published_at": "2016-01-30T15:47:08+00:00" }, { "id": "01a0dd15-8f76-7380-b990-f3209379d301", "title": "Short demo of the 8mm film scanner output", "url": "https://www.sabulo.com/sb/3d-printing-2/short-demo-of-the-8mm-film-scanner/", "published_at": "2016-01-30T15:42:06+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-9128907fbde4", "title": "The 8mm film scanner (Telecine) project, part 2 – Hacked camera", "url": "https://www.sabulo.com/sb/8mm-film/the-8mm-film-scanner-telecine-project-part-2/", "published_at": "2015-12-13T17:47:43+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-912891653503", "title": "The 8mm film scanner (Telecine) project, part 1 – Overview", "url": "https://www.sabulo.com/sb/8mm-film/the-8mm-film-scanner-project-part-1/", "published_at": "2015-12-11T06:57:52+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-91289217faea", "title": "Printing the scanner frame, part 2", "url": "https://www.sabulo.com/sb/3d-printing-2/printing-the-scanner-frame-part-2/", "published_at": "2015-11-12T11:29:22+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-912892d1a63f", "title": "Teaser for next project: Arduino-driven 8mm film scanner", "url": "https://www.sabulo.com/sb/blender/teaser-for-next-project-arduino-driven-8mm-film-scanner/", "published_at": "2015-11-08T09:35:31+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-912893d1670e", "title": "Printing the scanner frame, part 1", "url": "https://www.sabulo.com/sb/3d-printing-2/printing-the-scanner-frame/", "published_at": "2015-09-23T06:14:58+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-912894ac79d9", "title": "3D Scanning with Autodesk’s 123D Catch", "url": "https://www.sabulo.com/sb/blender/3d-scanning-with-autodesks-123d-catch/", "published_at": "2015-09-21T17:32:59+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-912895561eba", "title": "Google Forms and Excel, part 1", "url": "https://www.sabulo.com/sb/excel/google-forms-and-excel-part-1/", "published_at": "2015-08-13T08:26:58+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-9128964779e0", "title": "Using Blender’s video editor", "url": "https://www.sabulo.com/sb/blender/using-blenders-video-editor/", "published_at": "2015-06-15T09:49:10+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-9128968f9132", "title": "Trebuchet, part III – moving parts", "url": "https://www.sabulo.com/sb/3d-printing-2/trebuchet-part-iii-moving-parts/", "published_at": "2015-04-27T11:51:32+00:00" }, { "id": "01a0dd21-983e-7291-9cb0-91289716a3d6", "title": "Trebuchet, or counterweight catapult, part II", "url": "https://www.sabulo.com/sb/3d-printing-2/trebuchet-or-counterweight-catapult-part-ii/", "published_at": "2015-04-16T10:11:43+00:00" }, { "id": "01a0dd33-2314-72af-9401-c001669958b2", "title": "Greetings from Denmark", "url": "https://www.sabulo.com/sb/3d-printing-2/greetings-from-denmark/", "published_at": "2015-04-09T11:52:52+00:00" }, { "id": "01a0dd33-2314-72af-9401-c00166d311b8", "title": "CeBIT Trade Fair 2015, Day 4 and closing notes", "url": "https://www.sabulo.com/sb/3d-printing-2/cebit-trade-fair-2015-day-4-and-closing-notes/", "published_at": "2015-03-27T11:17:51+00:00" }, { "id": "01a0dd33-2314-72af-9401-c00167a72626", "title": "CeBIT 2015, Day 4 and closing notes", "url": "https://www.sabulo.com/sb/cebit-2015/cebit-2015-day-4-and-closing-notes/", "published_at": "2015-03-19T16:07:58+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e288ad58", "title": "CeBIT Trade Fair 2015, Day 3", "url": "https://www.sabulo.com/sb/3d-printing-2/cebit-trade-fair-2015-day-3/", "published_at": "2015-03-18T21:43:59+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e30c8c7c", "title": "CeBIT Trade Fair 2015, Day 2", "url": "https://www.sabulo.com/sb/3d-printing-2/cebit-trade-fair-2015-day-2/", "published_at": "2015-03-17T21:43:59+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e34542c1", "title": "CeBIT Trade Fair 2015, Day 1", "url": "https://www.sabulo.com/sb/3d-printing-2/cebit-trade-fair-2015-day-1/", "published_at": "2015-03-16T19:36:54+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e3faae5b", "title": "Trebuchet, or counterweight catapult, part I", "url": "https://www.sabulo.com/sb/3d-printing-2/trebuchet-or-counterweight-catapult-part-i/", "published_at": "2015-03-13T17:47:31+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e41cc8de", "title": "Quick but not dirty printing", "url": "https://www.sabulo.com/sb/3d-printing-2/quick-but-not-dirty-printing/", "published_at": "2015-03-07T16:17:36+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e4540032", "title": "New developments at the 3D lab", "url": "https://www.sabulo.com/sb/3d-printing-2/new-developments-at-the-3d-lab/", "published_at": "2015-02-25T09:57:39+00:00" }, { "id": "01a0dd33-2315-72e3-a369-1d39e4efe89c", "title": "Crowdsourcing and account deletions", "url": "https://www.sabulo.com/sb/usability/crowdsourcing-and-account-deletions/", "published_at": "2015-02-21T12:12:12+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5b277c50", "title": "Printing gears, part II", "url": "https://www.sabulo.com/sb/3d-printing-2/printing-gears-part-ii/", "published_at": "2015-02-16T10:18:19+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5beb9bd6", "title": "Printing gears, part I", "url": "https://www.sabulo.com/sb/3d-printing-2/printing-gears-part-i/", "published_at": "2015-02-13T12:27:17+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5cd27699", "title": "Getting the 3D Print Lab running", "url": "https://www.sabulo.com/sb/3d-printing-2/getting-the-3d-print-lab-running/", "published_at": "2015-01-22T15:39:31+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5d3c186c", "title": "Solving everyday niggly bits with 3D Printing", "url": "https://www.sabulo.com/sb/3d-printing-2/solving-everyday-niggly-bits-with-3d-printing/", "published_at": "2014-12-10T07:53:15+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5d5d9d34", "title": "Fooling people with radiation protection", "url": "https://www.sabulo.com/sb/false-science/fooling-people-with-radiation/", "published_at": "2014-11-22T11:20:04+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5de6b5d4", "title": "Back after the Summer with a Stamp", "url": "https://www.sabulo.com/sb/3d-printing-2/back-after-the-summer-with-a-stamp/", "published_at": "2014-09-02T08:08:54+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5e3b68e1", "title": "Quick ‘n’ dirty 3D printing", "url": "https://www.sabulo.com/sb/3d-printing-2/quick-n-dirty-3d/", "published_at": "2014-04-17T11:50:41+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5f0caa75", "title": "Printing Fractals on MiniFactory", "url": "https://www.sabulo.com/sb/3d-printing-2/printing-fractals-on/", "published_at": "2014-03-30T12:57:29+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb5fc6c264", "title": "Things I have learned of MiniFactory", "url": "https://www.sabulo.com/sb/3d-printing-2/things-i-have-learned-of-minifactory/", "published_at": "2014-03-27T08:02:17+00:00" }, { "id": "01a0dd50-040e-7340-994d-b9eb6021dccc", "title": "Happy Hacking Day 2014 a success", "url": "https://www.sabulo.com/sb/3d-printing-2/happy-hacking-day-2014-a-success/", "published_at": "2014-02-12T13:17:59+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b793e56a88", "title": "IT Haiku Poetry", "url": "https://www.sabulo.com/sb/excel/it-haiku-poetry/", "published_at": "2014-01-25T18:05:09+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b794dc7d4a", "title": "Word count Excel for authors", "url": "https://www.sabulo.com/sb/excel/word-count-excel-for-authors/", "published_at": "2014-01-22T12:37:27+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b7953842e6", "title": "Powerpoint and image processing", "url": "https://www.sabulo.com/sb/powerpoint-2/powerpoint-and-image-processing/", "published_at": "2014-01-15T11:24:47+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b795bed157", "title": "Fonts, fonts, fonts – have you checked yours lately?", "url": "https://www.sabulo.com/sb/usability/fonts-fonts-fonts-have-you-checked-yours-lately/", "published_at": "2013-12-14T09:18:14+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b796334916", "title": "Part 2 of the 3D Printer post", "url": "https://www.sabulo.com/sb/blender/part-2-of-the-3d-printer-post/", "published_at": "2013-11-27T19:23:34+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b796de0461", "title": "3D Printing has arrived at HAAGA-HELIA, part 1", "url": "https://www.sabulo.com/sb/blender/3d-printer-has-arrived-at-haaga-helia/", "published_at": "2013-11-27T11:13:27+00:00" }, { "id": "01a0dd64-3e27-739e-ab9f-b5b796fc2e51", "title": "A basic info package on Blender", "url": "https://www.sabulo.com/sb/blender/a-basic-info-package-on-blender/", "published_at": "2013-08-26T06:25:06+00:00" }, { "id": "01a0dd64-3e28-72d4-9ec6-359b8b0c96fd", "title": "Make a Win Phone app… and then?", "url": "https://www.sabulo.com/sb/cutting-edge-technology/make-a-win-phone-app-and-then/", "published_at": "2013-05-16T11:03:55+00:00" }, { "id": "01a0dd64-3e28-72d4-9ec6-359b8bff44e4", "title": "Update on Windows phones", "url": "https://www.sabulo.com/sb/smartphone/update-on-windows-phones/", "published_at": "2013-01-22T05:56:34+00:00" }, { "id": "01a0dd64-3e28-72d4-9ec6-359b8cbf5617", "title": "Viking King Harald and mobile phones", "url": "https://www.sabulo.com/sb/cutting-edge-technology/viking-king-harald-and-mobile-phones/", "published_at": "2012-10-23T12:01:43+00:00" } ] posts Claim your blog
Back to sabulo.com
Blog · corpus.blog/blogs/sabulo.com/posts

sabulo.com

sabulo.com

2026

Ye Olde Out of Office: Building a 7.5″ Bayeux Tapestry E-Paper Status Signoriginal ↗
10 Jun 2026

2024

ESP32 MPY-Jama, an excellent IDE for using Python on ESP32original ↗
17 May 2024
Revising the ESP32 Spotify Display with ChatGPToriginal ↗
10 Feb 2024

2023

Restarting an ESP32 via Telegramoriginal ↗
20 Apr 2023

2022

GPS-equipped portable atmospheric recorder, with LCD and map displayoriginal ↗
27 Apr 2022
Spotify song display with ESP32 and e-paper displayoriginal ↗
18 Apr 2022
Time Management Cubeoriginal ↗
4 Apr 2022

2021

Video insert length indicator with large LED segment displays and ESP32original ↗
5 Nov 2021
Humidity and temperature data on IoToriginal ↗
30 Mar 2021

2020

Home made large 7 segment LED displayoriginal ↗
18 Dec 2020
Back in business with the Seeedstudio Grove Arduino kitoriginal ↗
14 Aug 2020
Documentation images for the Kotokino Mark IV scanneroriginal ↗
18 May 2020
The Donald Duck hypnotizing machine with IoToriginal ↗
7 May 2020
Using the UDP protocol with an ESP32 and Android Studio, Part 4original ↗
28 Apr 2020
Using the UDP protocol with an ESP32 and Android Studio, Part 3original ↗
27 Apr 2020
Using 7 Segment LED displays, Part 4 – dual quadruple unitsoriginal ↗
21 Apr 2020
Using 7 Segment LED displays, Part 3original ↗
17 Apr 2020
Using the UDP protocol with an ESP32 and Android Studio, Part 2original ↗
17 Apr 2020
How to use the Heltec OLED display on the ESP32original ↗
16 Apr 2020
Using the UDP protocol with an ESP32 and Android Studio, Part 1original ↗
8 Apr 2020
8mm film scanner Kotokino Mark IVoriginal ↗
31 Mar 2020
The all new 3D + Robo Laboriginal ↗
11 Feb 2020

2019

Interlude – LED Segment calculatororiginal ↗
7 Sept 2019
Using 7 Segment LED displays, Part 2original ↗
3 Sept 2019
Using 7 Segment LED displays, Part 1original ↗
21 Aug 2019
Low cost, low impact queue monitoring systemoriginal ↗
12 Apr 2019
8mm Film Scanner, final version with Canon 1000Doriginal ↗
23 Jan 2019

2018

How to enter the Internet of Thingsoriginal ↗
13 Dec 2018
Moving on from Arduino to ESP32 – Part 3, uPyCraft and Blinkoriginal ↗
20 Nov 2018
Moving on from Arduino to ESP32 – Part 2, MicroPythonoriginal ↗
3 Oct 2018
Moving on from Arduino to ESP32 – Part 1original ↗
27 Sept 2018
An official stamp for the 3D Laboriginal ↗
17 Sept 2018
Season Finale – crafting a replacement partoriginal ↗
30 May 2018
ESP32 – Arduino on Steroidsoriginal ↗
22 May 2018
The Morse Moai statue projectoriginal ↗
1 Mar 2018
Finding rotation speed using Arduinooriginal ↗
8 Feb 2018

2017

Accelerometer, that tiny workhorseoriginal ↗
29 Nov 2017
Proof of concept: servo speed and rotationoriginal ↗
13 Oct 2017
Introducing 8mm Scanner v2.0original ↗
27 Sept 2017
Wrapping up academic year 2016-17original ↗
28 May 2017
An exciting product launch on metal printingoriginal ↗
21 Apr 2017
Single input, multiple output power source for a variety of needsoriginal ↗
12 Apr 2017
Assembling a CoLiDo DIY 3D printer, part 1original ↗
31 Mar 2017
Fantastic tool for metal printingoriginal ↗
13 Mar 2017
Quick prints for everyday issuesoriginal ↗
18 Jan 2017
New, improved 3D Lab at Haaga-Heliaoriginal ↗
13 Jan 2017

2016

I been Slush’doriginal ↗
1 Dec 2016
A lecture on 3D and my Universityoriginal ↗
30 Oct 2016
Building a 2 way tiltable webcam stand, part 2original ↗
12 Oct 2016
Building a 2 way tiltable webcam standoriginal ↗
26 Sept 2016
Troubleshooting Arduino problems related to poweroriginal ↗
16 Sept 2016
Your first Blender game, part 2original ↗
3 May 2016
Visiting Ypres, and high tech in museumsoriginal ↗
25 Apr 2016
Your first Blender game in 15 minutesoriginal ↗
15 Apr 2016
3D printed food is hereoriginal ↗
30 Mar 2016
The most cost-effective internationalization methodoriginal ↗
29 Mar 2016
The 8mm film scanner (Telecine) project, part 5 – Programmingoriginal ↗
21 Feb 2016
The 8mm film scanner (Telecine) project, part 4 – Arduinooriginal ↗
31 Jan 2016
The 8mm film scanner (Telecine) project, part 3 – Printed partsoriginal ↗
30 Jan 2016
Short demo of the 8mm film scanner outputoriginal ↗
30 Jan 2016

2015

The 8mm film scanner (Telecine) project, part 2 – Hacked cameraoriginal ↗
13 Dec 2015
The 8mm film scanner (Telecine) project, part 1 – Overvieworiginal ↗
11 Dec 2015
Printing the scanner frame, part 2original ↗
12 Nov 2015
Teaser for next project: Arduino-driven 8mm film scanneroriginal ↗
8 Nov 2015
Printing the scanner frame, part 1original ↗
23 Sept 2015
3D Scanning with Autodesk’s 123D Catchoriginal ↗
21 Sept 2015
Google Forms and Excel, part 1original ↗
13 Aug 2015
Using Blender’s video editororiginal ↗
15 Jun 2015
Trebuchet, part III – moving partsoriginal ↗
27 Apr 2015
Trebuchet, or counterweight catapult, part IIoriginal ↗
16 Apr 2015
Greetings from Denmarkoriginal ↗
9 Apr 2015
CeBIT Trade Fair 2015, Day 4 and closing notesoriginal ↗
27 Mar 2015
CeBIT 2015, Day 4 and closing notesoriginal ↗
19 Mar 2015
CeBIT Trade Fair 2015, Day 3original ↗
18 Mar 2015
CeBIT Trade Fair 2015, Day 2original ↗
17 Mar 2015
CeBIT Trade Fair 2015, Day 1original ↗
16 Mar 2015
Trebuchet, or counterweight catapult, part Ioriginal ↗
13 Mar 2015
Quick but not dirty printingoriginal ↗
7 Mar 2015
New developments at the 3D laboriginal ↗
25 Feb 2015
Crowdsourcing and account deletionsoriginal ↗
21 Feb 2015
Printing gears, part IIoriginal ↗
16 Feb 2015
Printing gears, part Ioriginal ↗
13 Feb 2015
Getting the 3D Print Lab runningoriginal ↗
22 Jan 2015

2014

Solving everyday niggly bits with 3D Printingoriginal ↗
10 Dec 2014
Fooling people with radiation protectionoriginal ↗
22 Nov 2014
Back after the Summer with a Stamporiginal ↗
2 Sept 2014
Quick ‘n’ dirty 3D printingoriginal ↗
17 Apr 2014
Printing Fractals on MiniFactoryoriginal ↗
30 Mar 2014
Things I have learned of MiniFactoryoriginal ↗
27 Mar 2014
Happy Hacking Day 2014 a successoriginal ↗
12 Feb 2014
IT Haiku Poetryoriginal ↗
25 Jan 2014
Word count Excel for authorsoriginal ↗
22 Jan 2014
Powerpoint and image processingoriginal ↗
15 Jan 2014

2013

Fonts, fonts, fonts – have you checked yours lately?original ↗
14 Dec 2013
Part 2 of the 3D Printer postoriginal ↗
27 Nov 2013
3D Printing has arrived at HAAGA-HELIA, part 1original ↗
27 Nov 2013
A basic info package on Blenderoriginal ↗
26 Aug 2013
Make a Win Phone app… and then?original ↗
16 May 2013
Update on Windows phonesoriginal ↗
22 Jan 2013

2012

Viking King Harald and mobile phonesoriginal ↗
23 Oct 2012
Next