corpus.blog
41554 blogs · [ { "id": "01a08771-5797-7275-8169-79f261e2cab1", "title": "2026 AutoX Season Prep - Year 3 of XB", "url": "https://eddieabbondanz.io/post/civic/2026-autox-prep/", "published_at": "2026-07-31T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f262c6c318", "title": "The Unexpected End", "url": "https://eddieabbondanz.io/post/original-xj-build/the-unexpected-end/", "published_at": "2026-06-19T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26383890b", "title": "How to Build a B20 VTEC Part 13: Install And First Start", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-13/", "published_at": "2026-05-21T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f263df7cbd", "title": "How to Build a B20 VTEC Part 12: Engine Accessories", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-12/", "published_at": "2026-05-19T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2648b86c6", "title": "How to Build a B20 VTEC Part 11: Positive Crankcase Ventilation", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-11/", "published_at": "2026-05-18T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26519b139", "title": "How to Build a B20 VTEC Part 10: Air and Fuel Delivery, VTEC Oil Feed, and Coolant Lines", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-10/", "published_at": "2026-04-12T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2655e9d5e", "title": "How to Build a B20 VTEC Part 9: Setting Timing, Valve Lash, and Buttoning Up The Block", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-9/", "published_at": "2026-03-23T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f266555ee7", "title": "The Correct Distributor Cap For the B18C1 (GSR) TD-68U / TD-84U", "url": "https://eddieabbondanz.io/post/honda/correct-distributor-cap-for-b18c1-td-68u/", "published_at": "2026-03-12T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26698b642", "title": "How to Build a B20 VTEC Part 8: Torquing Down the Head and Installing the Cams", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-8/", "published_at": "2026-03-08T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2675ad0cb", "title": "How to Build a B20 VTEC Part 7: V2V Clearance, Degreeing the Cams, and P2V Clearance", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-7/", "published_at": "2026-03-07T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f267b10a60", "title": "How to Build a B20 VTEC Part 6: Head Prep", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-6/", "published_at": "2026-03-06T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f268115e62", "title": "How I (Almost) Fixed My MMU3 Jamming When Finishing Prints", "url": "https://eddieabbondanz.io/post/3d-printing/how-i-addressed-mmu3-unload-jams/", "published_at": "2026-03-02T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f268b7d092", "title": "PrusaSlicer: Custom First Layer Extrusion Multiplier", "url": "https://eddieabbondanz.io/post/3d-printing/prusa-slicer-custom-first-layer-extrusion-multiplier/", "published_at": "2026-02-24T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f268bd5bc7", "title": "Prusa Slicer: How to Increase Initial Purge Line Length", "url": "https://eddieabbondanz.io/post/3d-printing/prusa-slicer-increase-initial-purge-line-length/", "published_at": "2026-02-23T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f268ca8346", "title": "Rust Repair Part 27: Prepping Four Doors Takes Forever", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-27/", "published_at": "2026-01-19T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2698d260c", "title": "How To Set Up a Rollo Thermal Printer With Linux", "url": "https://eddieabbondanz.io/post/linux/setting-up-a-rollo-thermal-printer-with-linux/", "published_at": "2025-12-20T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26a69bea9", "title": "My $450 Scratch Built NAS with 12TB of Storage", "url": "https://eddieabbondanz.io/post/homelab/diy-elitedesk-g3-800-sff-nas/", "published_at": "2025-11-27T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26b4b8b16", "title": "Rust Repair Part 26: Welding in the Driver 2x6 Rocker", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-26/", "published_at": "2025-11-18T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26bdf94be", "title": "Rust Repair Part 25: Rebuilding the Driver Quarter Panel", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-25/", "published_at": "2025-11-17T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26c91d5f4", "title": "How to Build a B20 VTEC Part 5: Bottom End Assembly", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-5/", "published_at": "2025-11-10T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26ce0603d", "title": "B16 / B18C1 / B18C5 Torque Specs", "url": "https://eddieabbondanz.io/post/honda/b16-gsr-type-r-torque-specs/", "published_at": "2025-10-21T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26dade85b", "title": "How to Build a B20 VTEC Part 4: Piston to Wall Clearance and Ring Gaps", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-4/", "published_at": "2025-10-18T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26dfc0dcd", "title": "How to Build a B20 VTEC Part 3: Measuring Bearing Clearances", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-3/", "published_at": "2025-10-13T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26e117d7b", "title": "Rust Repair Part 24: Final Tweaks for the Passenger Fender", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-24/", "published_at": "2025-10-09T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26ebe7876", "title": "How to Get Your Prusa i3 MK3.5S to Pass Fan Calibration", "url": "https://eddieabbondanz.io/post/3d-printing/mk3.5s-fan-calibration/", "published_at": "2025-09-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26f9611c1", "title": "I Bought an 05 RSX Type S With a Blown Transmission", "url": "https://eddieabbondanz.io/post/rsx-type-s/1-the-intro/", "published_at": "2025-09-06T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26fb0b296", "title": "Spring Rate Converter", "url": "https://eddieabbondanz.io/post/honda/spring-rate-converter/", "published_at": "2025-09-01T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f26fc8ace3", "title": "Two Seasons of Autocross Under It's Belt", "url": "https://eddieabbondanz.io/post/civic/two-seasons-of-autocross/", "published_at": "2025-08-24T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f270043962", "title": "Rust Repair Part 23: Fixing The Windshield Pillar Gaps And Adding Bracing", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-23/", "published_at": "2025-08-13T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27092d6c8", "title": "A Custom Rear Hitch To Haul My Mini Bike", "url": "https://eddieabbondanz.io/post/civic/custom-rear-hitch-receiver/", "published_at": "2025-08-07T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f271617e1b", "title": "FreeCAD AppImage Fails to Start Due to SquashFS Error", "url": "https://eddieabbondanz.io/post/linux/freecad-appimage-fails-to-start/", "published_at": "2025-08-04T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2725e7b61", "title": "Arco Mini Bike Build With a Predator 212 Swap", "url": "https://eddieabbondanz.io/post/shop/mini-bike-build/", "published_at": "2025-08-03T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27349520d", "title": "How to Install Syncthing on Ubuntu", "url": "https://eddieabbondanz.io/post/linux/how-to-install-syncthing/", "published_at": "2025-07-28T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2740d66d8", "title": "B-Series Gear Calculator", "url": "https://eddieabbondanz.io/post/honda/b-series-gear-calculator/", "published_at": "2025-07-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f274d0a7f2", "title": "Rust Repair Part 22: Getting Jiggy With the XJ and Putting It on a Chassis Table", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-22/", "published_at": "2025-06-20T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27505b09a", "title": "LS Swap Part 2: Converting a NP241C Transfer Case For the XJ With a SYE", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/ls-swap-part-2-transfer-case/", "published_at": "2025-06-12T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f275be5a5d", "title": "LS Swap Part 1: A New Heart for the XJ", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/ls-swap-part-1/", "published_at": "2025-06-10T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f275fec66e", "title": "How I Built My Chassis Table", "url": "https://eddieabbondanz.io/post/tools/diy-chassis-table/", "published_at": "2025-05-31T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f276ac0d1d", "title": "Rust Repair Part 21: Blowing Off the Dust a Year Later AGAIN", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-21/", "published_at": "2025-05-17T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f276b47db8", "title": "Engine Stand Bolts For The 84-01 XJ 4.0", "url": "https://eddieabbondanz.io/post/xj-info/xj-engine-stand-bolts/", "published_at": "2025-05-16T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2772942df", "title": "Swapping Another Dana 30 In", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/4-swapping-another-dana-30-in/", "published_at": "2025-05-10T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2773d5b21", "title": "The End", "url": "https://eddieabbondanz.io/post/88-integra/the-end/", "published_at": "2025-04-12T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f277b5801a", "title": "Centered vs Offset AW4 Transmission Mounts", "url": "https://eddieabbondanz.io/post/xj-info/aw4-mounts/", "published_at": "2025-03-21T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f277cb812f", "title": "XJ Rear Disk Conversion", "url": "https://eddieabbondanz.io/post/xj-info/dana-35-rear-disk-conversion/", "published_at": "2025-03-05T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f277e9470a", "title": "97-01 XJ Interior Bulb Sizes for LEDs", "url": "https://eddieabbondanz.io/post/xj-info/xj-interior-bulb-sizes-for-leds/", "published_at": "2025-02-23T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2785b9474", "title": "Repairing the Quarter Panels and Rusty Roof", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/3-repairing-the-roof-and-quarters/", "published_at": "2025-02-17T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2795349a2", "title": "Fixing All The Mechanical Issues", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/2-fixing-all-the-mechanical-issues/", "published_at": "2025-02-15T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27981b858", "title": "Buying a Second XJ From Across the US", "url": "https://eddieabbondanz.io/post/oemplus-xj-build/1-buying-a-second-xj/", "published_at": "2025-02-14T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27a4ee1ad", "title": "Harbor Freight 30-5 Cart Lid Lock Delete Mod", "url": "https://eddieabbondanz.io/post/tools/hf-30-5-lid-lock-delete-mod/", "published_at": "2024-12-01T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27b0b9f26", "title": "How to Build a B20 VTEC Part 2: Collecting All the Parts", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-2/", "published_at": "2024-11-28T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27b18181c", "title": "How to Build a B20 VTEC Part 1: Planning Your Goals and Budget", "url": "https://eddieabbondanz.io/post/honda/how-to-build-a-b20-vtec-part-1/", "published_at": "2024-11-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27bf290a4", "title": "OBD0 Check Engine Light Codes", "url": "https://eddieabbondanz.io/post/honda/obd0-cel-codes/", "published_at": "2024-11-01T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27c9b6950", "title": "Replacements Bins for the HF 15 and 20 Bin Storage Cases", "url": "https://eddieabbondanz.io/post/tools/hf-15-20-storage-bin-case-replacement-bins/", "published_at": "2024-10-25T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27d609ae2", "title": "XJ Suspension Torque Specs", "url": "https://eddieabbondanz.io/post/xj-info/suspension-torque-specs/", "published_at": "2024-10-23T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27e5ddda8", "title": "88 - 89 Integra OBD0 ECU Capacitors", "url": "https://eddieabbondanz.io/post/honda/88-89-integra-ecu-capacitors/", "published_at": "2024-10-20T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27e600bb6", "title": "AN Transmission Lines Upgrade with Aftermarket Trans Cooler", "url": "https://eddieabbondanz.io/post/xj-info/an-transmission-lines-with-cooler/", "published_at": "2024-08-03T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27f1b145a", "title": "ZJ Steering Upgrade with Parts List", "url": "https://eddieabbondanz.io/post/xj-info/zj-steering-upgrade-with-parts-list/", "published_at": "2024-08-03T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27f52335d", "title": "How to Piece Together a 2\" Old Man Emu Lift", "url": "https://eddieabbondanz.io/post/xj-info/how-to-piece-together-a-2-inch-ome-lift/", "published_at": "2024-07-28T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f27f9ffd9a", "title": "ASR 24mm Rear Sway Bar and Brace Install", "url": "https://eddieabbondanz.io/post/civic/asr-rear-sway-bar-and-subframe-brace/", "published_at": "2024-06-09T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f280213e22", "title": "How to tell if a B20B is high compression", "url": "https://eddieabbondanz.io/post/honda/low-comp-or-high-comp-b20b/", "published_at": "2024-05-27T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f280dc6bfd", "title": "Rust Repair Part 20: Blowing Off the Dust a Year Later", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-20/", "published_at": "2024-05-10T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28164a868", "title": "OBD1 Check Engine Light Codes", "url": "https://eddieabbondanz.io/post/honda/obd1-cel-codes/", "published_at": "2024-05-04T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f282081972", "title": "B18 / B20 Torque Specs", "url": "https://eddieabbondanz.io/post/honda/b18-b20-torque-specs/", "published_at": "2024-04-25T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f282404ce3", "title": "Goodbye H Street, Hello STS", "url": "https://eddieabbondanz.io/post/88-integra/a-stiffer-lower-suspension-for-sts/", "published_at": "2024-04-06T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f282ef78c4", "title": "Revival of the Hatch Part 23: The Final Push To Get It Road Legal", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-23/", "published_at": "2024-04-05T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f282fd3fb6", "title": "Revival of the Hatch Part 22: Dyeing the Rear Interior and Running Fuel Lines for the First Start", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-22/", "published_at": "2024-03-05T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f283582702", "title": "How To: 92-95 Civic Coupe/Hatch Power Windows, Locks, and Mirrors DIY Conversion", "url": "https://eddieabbondanz.io/post/honda/eg-civic-power-windows-locks-mirror-conversion/", "published_at": "2024-02-28T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2835eac19", "title": "Revival of the Hatch Part 21: Jamming out the Cabin Harness so I Can Put the Dash Back In", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-21/", "published_at": "2024-02-22T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f283bb6bf2", "title": "Revival of the Hatch Part 20: Wiring Some DIY Headlight / Radiator Relay Harnesses and Power Door Harnesses", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-20/", "published_at": "2024-02-14T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28415dc90", "title": "Revival of the Hatch Part 19: The New Duckbill", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-19/", "published_at": "2024-01-31T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f284328ffb", "title": "Revival of the Hatch Part 18: Finalizing the New Brakes", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-18/", "published_at": "2024-01-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f284462523", "title": "Revival of the Hatch Part 17: Cleaning up the Cabin Harness and Installing Hood Pins", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-17/", "published_at": "2024-01-22T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f284c44102", "title": "Revival of the Hatch Part 16: Redoing my Shifter Conversion Plate", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-16/", "published_at": "2024-01-18T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f284dea6f0", "title": "Revival of the Hatch Part 15: Bolting More Bits Back On", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-15/", "published_at": "2024-01-05T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f284e920de", "title": "Revival of the Hatch Part 14: Pushing Through the Final Bodywork", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-14/", "published_at": "2023-12-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2850fbed7", "title": "Revival of the Hatch Part 13: Denjis and a Custom Radiator Fan Shroud", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-13/", "published_at": "2023-12-21T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f286013089", "title": "Revival of the Hatch Part 12: No More Cabin Water Leaks", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-12/", "published_at": "2023-11-27T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2861dc5fe", "title": "Revival of the Hatch Part 11: Beginning Reassembly", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-11/", "published_at": "2023-11-11T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f287098503", "title": "Revival of the Hatch Part 10: Dropping the B20B Back In and Fixing Some Mistakes", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-10/", "published_at": "2023-10-28T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2879e4688", "title": "How To: 92-95 Civic Rear Disk Conversion using Drum Trailing Arms", "url": "https://eddieabbondanz.io/post/honda/eg-civic-rear-disk-conversion-using-drum-trailing-arms/", "published_at": "2023-10-21T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2883eb872", "title": "Revival of the Hatch Part 9: Taking the Engine Bay From Primer to Paint and All the Filler Inbetween", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-9/", "published_at": "2023-10-18T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2888915a5", "title": "Revival of the Hatch Part 8: Raptor Lining the Front Wheel Wells and Finishing the Firewall", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-8/", "published_at": "2023-09-25T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2896b402e", "title": "Revival of the Hatch Part 7: Re-Adding Power Steering, a Full-Sized Radiator and More", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-7/", "published_at": "2023-09-16T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28a2e6d6b", "title": "Revival of the Hatch Part 6: Overhauling the Suspension", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-6/", "published_at": "2023-08-31T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28a3f1351", "title": "Revival of the Hatch Part 5: Sandblasting the Engine Bay", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-5/", "published_at": "2023-07-20T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28b1e614e", "title": "Revival of the Hatch Part 4: Even More Teardown", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-4/", "published_at": "2023-07-16T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28be9c2e4", "title": "Revival of the Hatch Part 3: Giving the Motor a Quick Refresh", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-3/", "published_at": "2023-07-14T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28ce3cc74", "title": "Revival of the Hatch Part 2: Revamping the Trans with an LSD", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-2/", "published_at": "2023-07-07T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28d125dc1", "title": "Adding a Rear Sway Bar", "url": "https://eddieabbondanz.io/post/88-integra/adding-a-rear-sway-bar/", "published_at": "2023-06-29T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28daf247e", "title": "Replacing a Damaged B-Series Speedometer Gear", "url": "https://eddieabbondanz.io/post/honda/replacing-a-damaged-b-series-speedometer-ring-gear/", "published_at": "2023-06-25T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28dde0dd5", "title": "Revival of the Hatch Part 1: Restarting a Forgotten Project", "url": "https://eddieabbondanz.io/post/civic/the-revival-part-1/", "published_at": "2023-06-03T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28e275fd0", "title": "Stepping up my Auto-X Game", "url": "https://eddieabbondanz.io/post/88-integra/stepping-up-my-auto-x-game/", "published_at": "2023-05-26T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28ef84d0b", "title": "Rust Repair Part 19: Salvaging What I Can of the Driver Side", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-19/", "published_at": "2023-05-15T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28f4ca1a0", "title": "Rust Repair Part 18: Diving Into the Driver Side and Fixing the Drip Rail", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-18/", "published_at": "2023-04-13T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28f98af31", "title": "Rust Repair Part 17: Finally Finishing the Passenger Quarter Panel", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-17/", "published_at": "2023-04-12T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f28fdc5093", "title": "Rust Repair Part 16: A New Rear Passenger Inner Wheel Well", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-16/", "published_at": "2023-03-19T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f29066beac", "title": "Building My Ultimate Mig Cart", "url": "https://eddieabbondanz.io/post/tools/mig-cart/", "published_at": "2023-03-01T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f290d44c82", "title": "Beefing up a Budget Bead Roller", "url": "https://eddieabbondanz.io/post/tools/bead-roller/", "published_at": "2023-02-25T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2919cfab8", "title": "Rust Repair Part 15: Finalizing the 2x6 Rocker", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-15/", "published_at": "2022-11-03T00:00:00+00:00" }, { "id": "01a08771-5797-7275-8169-79f2926ef795", "title": "Rust Repair Part 14: Welding in the Passenger 2x6 Rocker", "url": "https://eddieabbondanz.io/post/original-xj-build/unibody-rust-repair-part-14/", "published_at": "2022-10-22T00:00:00+00:00" } ] posts Claim your blog
Back to eddieabbondanz.io
Blog · corpus.blog/blogs/eddieabbondanz.io/posts

eddieabbondanz.io

eddieabbondanz.io

2026

2026 AutoX Season Prep - Year 3 of XBoriginal ↗
31 Jul 2026
The Unexpected Endoriginal ↗
19 Jun 2026
How to Build a B20 VTEC Part 13: Install And First Startoriginal ↗
21 May 2026
How to Build a B20 VTEC Part 12: Engine Accessoriesoriginal ↗
19 May 2026
How to Build a B20 VTEC Part 11: Positive Crankcase Ventilationoriginal ↗
18 May 2026
How to Build a B20 VTEC Part 10: Air and Fuel Delivery, VTEC Oil Feed, and Coolant Linesoriginal ↗
12 Apr 2026
How to Build a B20 VTEC Part 9: Setting Timing, Valve Lash, and Buttoning Up The Blockoriginal ↗
23 Mar 2026
The Correct Distributor Cap For the B18C1 (GSR) TD-68U / TD-84Uoriginal ↗
12 Mar 2026
How to Build a B20 VTEC Part 8: Torquing Down the Head and Installing the Camsoriginal ↗
8 Mar 2026
How to Build a B20 VTEC Part 7: V2V Clearance, Degreeing the Cams, and P2V Clearanceoriginal ↗
7 Mar 2026
How to Build a B20 VTEC Part 6: Head Preporiginal ↗
6 Mar 2026
How I (Almost) Fixed My MMU3 Jamming When Finishing Printsoriginal ↗
2 Mar 2026
PrusaSlicer: Custom First Layer Extrusion Multiplieroriginal ↗
24 Feb 2026
Prusa Slicer: How to Increase Initial Purge Line Lengthoriginal ↗
23 Feb 2026
Rust Repair Part 27: Prepping Four Doors Takes Foreveroriginal ↗
19 Jan 2026

2025

How To Set Up a Rollo Thermal Printer With Linuxoriginal ↗
20 Dec 2025
My $450 Scratch Built NAS with 12TB of Storageoriginal ↗
27 Nov 2025
Rust Repair Part 26: Welding in the Driver 2x6 Rockeroriginal ↗
18 Nov 2025
Rust Repair Part 25: Rebuilding the Driver Quarter Paneloriginal ↗
17 Nov 2025
How to Build a B20 VTEC Part 5: Bottom End Assemblyoriginal ↗
10 Nov 2025
B16 / B18C1 / B18C5 Torque Specsoriginal ↗
21 Oct 2025
How to Build a B20 VTEC Part 4: Piston to Wall Clearance and Ring Gapsoriginal ↗
18 Oct 2025
How to Build a B20 VTEC Part 3: Measuring Bearing Clearancesoriginal ↗
13 Oct 2025
Rust Repair Part 24: Final Tweaks for the Passenger Fenderoriginal ↗
9 Oct 2025
How to Get Your Prusa i3 MK3.5S to Pass Fan Calibrationoriginal ↗
26 Sept 2025
I Bought an 05 RSX Type S With a Blown Transmissionoriginal ↗
6 Sept 2025
Spring Rate Converteroriginal ↗
1 Sept 2025
Two Seasons of Autocross Under It's Beltoriginal ↗
24 Aug 2025
Rust Repair Part 23: Fixing The Windshield Pillar Gaps And Adding Bracingoriginal ↗
13 Aug 2025
A Custom Rear Hitch To Haul My Mini Bikeoriginal ↗
7 Aug 2025
FreeCAD AppImage Fails to Start Due to SquashFS Errororiginal ↗
4 Aug 2025
Arco Mini Bike Build With a Predator 212 Swaporiginal ↗
3 Aug 2025
How to Install Syncthing on Ubuntuoriginal ↗
28 Jul 2025
B-Series Gear Calculatororiginal ↗
26 Jul 2025
Rust Repair Part 22: Getting Jiggy With the XJ and Putting It on a Chassis Tableoriginal ↗
20 Jun 2025
LS Swap Part 2: Converting a NP241C Transfer Case For the XJ With a SYEoriginal ↗
12 Jun 2025
LS Swap Part 1: A New Heart for the XJoriginal ↗
10 Jun 2025
How I Built My Chassis Tableoriginal ↗
31 May 2025
Rust Repair Part 21: Blowing Off the Dust a Year Later AGAINoriginal ↗
17 May 2025
Engine Stand Bolts For The 84-01 XJ 4.0original ↗
16 May 2025
Swapping Another Dana 30 Inoriginal ↗
10 May 2025
The Endoriginal ↗
12 Apr 2025
Centered vs Offset AW4 Transmission Mountsoriginal ↗
21 Mar 2025
XJ Rear Disk Conversionoriginal ↗
5 Mar 2025
97-01 XJ Interior Bulb Sizes for LEDsoriginal ↗
23 Feb 2025
Repairing the Quarter Panels and Rusty Rooforiginal ↗
17 Feb 2025
Fixing All The Mechanical Issuesoriginal ↗
15 Feb 2025
Buying a Second XJ From Across the USoriginal ↗
14 Feb 2025

2024

Harbor Freight 30-5 Cart Lid Lock Delete Modoriginal ↗
1 Dec 2024
How to Build a B20 VTEC Part 2: Collecting All the Partsoriginal ↗
28 Nov 2024
How to Build a B20 VTEC Part 1: Planning Your Goals and Budgetoriginal ↗
26 Nov 2024
OBD0 Check Engine Light Codesoriginal ↗
1 Nov 2024
Replacements Bins for the HF 15 and 20 Bin Storage Casesoriginal ↗
25 Oct 2024
XJ Suspension Torque Specsoriginal ↗
23 Oct 2024
88 - 89 Integra OBD0 ECU Capacitorsoriginal ↗
20 Oct 2024
AN Transmission Lines Upgrade with Aftermarket Trans Cooleroriginal ↗
3 Aug 2024
ZJ Steering Upgrade with Parts Listoriginal ↗
3 Aug 2024
How to Piece Together a 2" Old Man Emu Liftoriginal ↗
28 Jul 2024
ASR 24mm Rear Sway Bar and Brace Installoriginal ↗
9 Jun 2024
How to tell if a B20B is high compressionoriginal ↗
27 May 2024
Rust Repair Part 20: Blowing Off the Dust a Year Lateroriginal ↗
10 May 2024
OBD1 Check Engine Light Codesoriginal ↗
4 May 2024
B18 / B20 Torque Specsoriginal ↗
25 Apr 2024
Goodbye H Street, Hello STSoriginal ↗
6 Apr 2024
Revival of the Hatch Part 23: The Final Push To Get It Road Legaloriginal ↗
5 Apr 2024
Revival of the Hatch Part 22: Dyeing the Rear Interior and Running Fuel Lines for the First Startoriginal ↗
5 Mar 2024
How To: 92-95 Civic Coupe/Hatch Power Windows, Locks, and Mirrors DIY Conversionoriginal ↗
28 Feb 2024
Revival of the Hatch Part 21: Jamming out the Cabin Harness so I Can Put the Dash Back Inoriginal ↗
22 Feb 2024
Revival of the Hatch Part 20: Wiring Some DIY Headlight / Radiator Relay Harnesses and Power Door Harnessesoriginal ↗
14 Feb 2024
Revival of the Hatch Part 19: The New Duckbilloriginal ↗
31 Jan 2024
Revival of the Hatch Part 18: Finalizing the New Brakesoriginal ↗
26 Jan 2024
Revival of the Hatch Part 17: Cleaning up the Cabin Harness and Installing Hood Pinsoriginal ↗
22 Jan 2024
Revival of the Hatch Part 16: Redoing my Shifter Conversion Plateoriginal ↗
18 Jan 2024
Revival of the Hatch Part 15: Bolting More Bits Back Onoriginal ↗
5 Jan 2024

2023

Revival of the Hatch Part 14: Pushing Through the Final Bodyworkoriginal ↗
26 Dec 2023
Revival of the Hatch Part 13: Denjis and a Custom Radiator Fan Shroudoriginal ↗
21 Dec 2023
Revival of the Hatch Part 12: No More Cabin Water Leaksoriginal ↗
27 Nov 2023
Revival of the Hatch Part 11: Beginning Reassemblyoriginal ↗
11 Nov 2023
Revival of the Hatch Part 10: Dropping the B20B Back In and Fixing Some Mistakesoriginal ↗
28 Oct 2023
How To: 92-95 Civic Rear Disk Conversion using Drum Trailing Armsoriginal ↗
21 Oct 2023
Revival of the Hatch Part 9: Taking the Engine Bay From Primer to Paint and All the Filler Inbetweenoriginal ↗
18 Oct 2023
Revival of the Hatch Part 8: Raptor Lining the Front Wheel Wells and Finishing the Firewalloriginal ↗
25 Sept 2023
Revival of the Hatch Part 7: Re-Adding Power Steering, a Full-Sized Radiator and Moreoriginal ↗
16 Sept 2023
Revival of the Hatch Part 6: Overhauling the Suspensionoriginal ↗
31 Aug 2023
Revival of the Hatch Part 5: Sandblasting the Engine Bayoriginal ↗
20 Jul 2023
Revival of the Hatch Part 4: Even More Teardownoriginal ↗
16 Jul 2023
Revival of the Hatch Part 3: Giving the Motor a Quick Refreshoriginal ↗
14 Jul 2023
Revival of the Hatch Part 2: Revamping the Trans with an LSDoriginal ↗
7 Jul 2023
Adding a Rear Sway Baroriginal ↗
29 Jun 2023
Replacing a Damaged B-Series Speedometer Gearoriginal ↗
25 Jun 2023
Revival of the Hatch Part 1: Restarting a Forgotten Projectoriginal ↗
3 Jun 2023
Stepping up my Auto-X Gameoriginal ↗
26 May 2023
Rust Repair Part 19: Salvaging What I Can of the Driver Sideoriginal ↗
15 May 2023
Rust Repair Part 18: Diving Into the Driver Side and Fixing the Drip Railoriginal ↗
13 Apr 2023
Rust Repair Part 17: Finally Finishing the Passenger Quarter Paneloriginal ↗
12 Apr 2023
Rust Repair Part 16: A New Rear Passenger Inner Wheel Welloriginal ↗
19 Mar 2023
Building My Ultimate Mig Cartoriginal ↗
1 Mar 2023
Beefing up a Budget Bead Rolleroriginal ↗
25 Feb 2023

2022

Rust Repair Part 15: Finalizing the 2x6 Rockeroriginal ↗
3 Nov 2022
Rust Repair Part 14: Welding in the Passenger 2x6 Rockeroriginal ↗
22 Oct 2022
Next