corpus.blog
41554 blogs · [ { "id": "01a08765-9258-73d8-b754-10fc3deeec6d", "title": "NURBS in CAD (part 2)", "url": "http://cupofcad.org/2026/09/07/nurbs-in-cad-part-2/", "published_at": "2026-09-07T16:00:00+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc3e75ab61", "title": "NURBS in CAD (part I)", "url": "http://cupofcad.org/2026/08/21/nurbs-in-cad-part-i/", "published_at": "2026-08-21T17:02:00+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc3f1acc01", "title": "End of an Era", "url": "http://cupofcad.org/2026/08/12/end-of-an-era/", "published_at": "2026-08-12T16:15:50+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc3f5c5e0a", "title": "Who’s next?", "url": "http://cupofcad.org/2026/08/12/whos-next/", "published_at": "2026-08-12T15:33:30+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc3fd3b14d", "title": "Bad papers in CAD", "url": "http://cupofcad.org/2026/06/07/bad-papers-in-cad/", "published_at": "2026-06-07T09:21:46+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc40911666", "title": "Reflection on CAD algorithms", "url": "http://cupofcad.org/2026/06/03/reflection-on-cad-algorithms/", "published_at": "2026-06-03T03:30:25+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc40b266c3", "title": "Reverse engineering in CAD", "url": "http://cupofcad.org/2026/03/28/reverse-engineering-in-cad/", "published_at": "2026-03-28T12:05:00+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc419b8027", "title": "Gmsh and Netgen sample", "url": "http://cupofcad.org/2026/03/13/gmsh-and-netgen-sample/", "published_at": "2026-03-13T13:31:00+00:00" }, { "id": "01a08765-9258-73d8-b754-10fc41d141be", "title": "Netgen sample with OCCT (2026)", "url": "http://cupofcad.org/2026/02/21/netgen-sample-with-occt-2026/", "published_at": "2026-02-21T06:56:25+00:00" }, { "id": "01a08765-9259-726c-975a-95b85c99a045", "title": "Hang in _heapwalk()", "url": "http://cupofcad.org/2025/09/14/hang-in-_heapwalk/", "published_at": "2025-09-14T16:09:37+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17c6e738e", "title": "Lofting algorithm", "url": "http://cupofcad.org/2025/08/28/lofting-algorithm/", "published_at": "2025-08-28T16:28:24+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17ce737bc", "title": "CAD future under spatial intelligence skies", "url": "http://cupofcad.org/2025/07/19/cad-future-under-spatial-intelligence-skies/", "published_at": "2025-07-19T12:53:32+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17d7eeadf", "title": "Free version of WordPress is bullsh*t", "url": "http://cupofcad.org/2025/07/18/free-version-of-wordpress-is-bullsht/", "published_at": "2025-07-18T12:58:08+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17d8f7ce6", "title": "Introduction to direct modeling (part 2)", "url": "http://cupofcad.org/2025/07/14/introduction-to-direct-modeling-part-2/", "published_at": "2025-07-14T16:00:00+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17df265c2", "title": "Shape similarity detection", "url": "http://cupofcad.org/2025/06/27/shape-similarity-detection/", "published_at": "2025-06-27T13:00:00+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17e8ba6b3", "title": "Introduction to direct modeling", "url": "http://cupofcad.org/2025/06/02/introduction-to-direct-modeling/", "published_at": "2025-06-02T15:00:00+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b17f32f5fd", "title": "Building OCCT on Steam Deck", "url": "http://cupofcad.org/2025/04/30/building-occt-on-steam-deck/", "published_at": "2025-04-30T12:00:00+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b180173d6c", "title": "On modeling kernels", "url": "http://cupofcad.org/2025/04/26/on-modeling-kernels/", "published_at": "2025-04-26T11:00:00+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b180fba010", "title": "Geometric motives in GEM", "url": "http://cupofcad.org/2025/03/29/geometric-motives-in-gem/", "published_at": "2025-03-29T08:02:39+00:00" }, { "id": "01a0c504-fe05-7098-91d0-b4b18115d9de", "title": "Intersection in OCCT", "url": "http://cupofcad.org/2025/03/19/intersection-in-occt/", "published_at": "2025-03-19T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52be9ea10c", "title": "CAE workflow", "url": "http://cupofcad.org/2025/03/17/cae-workflow/", "published_at": "2025-03-17T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52bf5584c3", "title": "What does it mean to be an expert", "url": "http://cupofcad.org/2025/03/14/what-does-it-mean-to-be-an-expert/", "published_at": "2025-03-14T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52bf7dd77b", "title": "Geometric modeling in nutshell", "url": "http://cupofcad.org/2025/03/13/geometric-modeling-in-nutshell/", "published_at": "2025-03-13T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c0066d60", "title": "License protection of SDK", "url": "http://cupofcad.org/2025/03/12/license-protection-of-sdk/", "published_at": "2025-03-12T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c0073a4a", "title": "static_cast vs c-style conversion", "url": "http://cupofcad.org/2025/03/11/static_cast-vs-c-style-conversion/", "published_at": "2025-03-11T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c0c63e8c", "title": "Point clouds generation", "url": "http://cupofcad.org/2025/03/10/point-clouds-generation/", "published_at": "2025-03-10T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c134d076", "title": "Software tools for geometer", "url": "http://cupofcad.org/2025/03/07/software-tools-for-geometer/", "published_at": "2025-03-07T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c1f6b69a", "title": "On open-source products usage", "url": "http://cupofcad.org/2025/03/06/on-open-source-products-usage/", "published_at": "2025-03-06T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c221b0bd", "title": "Faceted and b-rep representations", "url": "http://cupofcad.org/2025/03/05/faceted-and-b-rep-representations/", "published_at": "2025-03-05T12:00:00+00:00" }, { "id": "01a0c516-cc4f-72f3-9e03-ca52c23de249", "title": "Where does CAD kernel begin (part 2)", "url": "http://cupofcad.org/2025/03/04/where-does-cad-kernel-begin-part-2/", "published_at": "2025-03-04T12:00:00+00:00" }, { "id": "01a0c521-a115-7232-ac34-74b6e5ed8af7", "title": "Where does CAD kernel begin", "url": "http://cupofcad.org/2025/03/03/where-does-cad-kernel-begin/", "published_at": "2025-03-03T12:00:00+00:00" }, { "id": "01a0c521-a115-7232-ac34-74b6e659c891", "title": "Cross-platform warning suppression in C++", "url": "http://cupofcad.org/2025/02/28/cross-platform-warning-suppression-in-c/", "published_at": "2025-02-28T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd252080d", "title": "On standards and compilers", "url": "http://cupofcad.org/2025/02/27/on-standards-and-compilers/", "published_at": "2025-02-27T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd2f69abf", "title": "Pipe usage in OCCT", "url": "http://cupofcad.org/2025/02/26/pipe-usage-in-occt/", "published_at": "2025-02-26T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd3cb4c95", "title": "About `auto` usage", "url": "http://cupofcad.org/2025/02/25/about-auto-usage/", "published_at": "2025-02-25T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd486b48a", "title": "Third-party products in our projects", "url": "http://cupofcad.org/2025/02/24/third-party-products-in-our-projects/", "published_at": "2025-02-24T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd5750476", "title": "Demo – Gmsh with Open CASCADE Technology", "url": "http://cupofcad.org/2025/02/21/demo-gmsh-with-open-cascade-technology/", "published_at": "2025-02-21T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd6596c8e", "title": "Qt building from sources", "url": "http://cupofcad.org/2025/02/20/qt-building-from-sources/", "published_at": "2025-02-20T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd674f273", "title": "Tool – Include What You Use", "url": "http://cupofcad.org/2025/02/19/tool-include-what-you-use/", "published_at": "2025-02-19T12:00:00+00:00" }, { "id": "01a0c521-a116-73f7-8d1c-e7efd6c6b074", "title": "Free CAD & mesh models", "url": "http://cupofcad.org/2025/02/18/free-cad-mesh-models/", "published_at": "2025-02-18T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a27980760", "title": "Compilation time of C++ projects", "url": "http://cupofcad.org/2025/02/17/compilation-time-of-c-projects/", "published_at": "2025-02-17T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a27e81512", "title": "Reconstruction of denoised data", "url": "http://cupofcad.org/2025/02/14/reconstruction-of-denoised-data/", "published_at": "2025-02-14T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a27fc6eba", "title": "Point cloud filtering", "url": "http://cupofcad.org/2025/02/13/point-cloud-filtering/", "published_at": "2025-02-13T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a283f18c3", "title": "Point cloud preparation for reconstruction", "url": "http://cupofcad.org/2025/02/12/point-cloud-preparation-for-reconstruction/", "published_at": "2025-02-12T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a28f8593e", "title": "Poisson reconstruction in CGAL", "url": "http://cupofcad.org/2025/02/11/poisson-reconstruction-in-cgal/", "published_at": "2025-02-11T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a298f68a1", "title": "Software optimization principles", "url": "http://cupofcad.org/2025/02/10/software-optimization-principles/", "published_at": "2025-02-10T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a2a8a64be", "title": "Performance improving using Visual Studio", "url": "http://cupofcad.org/2025/02/07/performance-improving-using-visual-studio/", "published_at": "2025-02-07T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a2ae48ab2", "title": "Why do we do pet projects", "url": "http://cupofcad.org/2025/02/06/why-do-we-do-pet-projects/", "published_at": "2025-02-06T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a2b397ebb", "title": "Good Books – Pragmatic Programmer, Refactoring, and Clean Code", "url": "http://cupofcad.org/2025/02/05/good-books-pragmatic-programmer-refactoring-and-clean-code/", "published_at": "2025-02-05T12:00:00+00:00" }, { "id": "01a0c52d-3db7-7282-8f94-809a2b928701", "title": "Demo – Netgen with Open CASCADE Technology", "url": "http://cupofcad.org/2025/02/04/demo-netgen-with-open-cascade-technology/", "published_at": "2025-02-04T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047b633dc8", "title": "Netgen building with Open CASCADE Technology", "url": "http://cupofcad.org/2025/02/03/netgen-building-with-open-cascade-technology/", "published_at": "2025-02-03T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047b7f9a56", "title": "Convex hull implementations for C++", "url": "http://cupofcad.org/2025/01/31/convex-hull-implementations-for-c/", "published_at": "2025-01-31T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047c0a705e", "title": "What do you work for", "url": "http://cupofcad.org/2025/01/30/what-do-you-work-for/", "published_at": "2025-01-30T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047cea1317", "title": "Migration to VTK 9", "url": "http://cupofcad.org/2025/01/29/migration-to-vtk-9/", "published_at": "2025-01-29T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047ddc23be", "title": "Building Open CASCADE Technology on Raspberry Pi", "url": "http://cupofcad.org/2025/01/28/building-open-cascade-technology-on-raspberry-pi/", "published_at": "2025-01-28T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047e36a8bb", "title": "Curve interpolation and approximation in Open CASCADE Technology", "url": "http://cupofcad.org/2025/01/27/curve-interpolation-and-approximation-in-open-cascade-technology/", "published_at": "2025-01-27T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047e71f70e", "title": "Overview of Open CASCADE Technology", "url": "http://cupofcad.org/2025/01/24/overview-of-open-cascade-technology/", "published_at": "2025-01-24T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b5047f4dfa1c", "title": "C++ libraries for a geometer (part 2)", "url": "http://cupofcad.org/2025/01/23/c-libraries-for-a-geometer-part-2/", "published_at": "2025-01-23T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b50480267e17", "title": "C++ libraries for a geometer", "url": "http://cupofcad.org/2025/01/22/c-libraries-for-a-geometer/", "published_at": "2025-01-22T12:00:00+00:00" }, { "id": "01a0c537-dc55-7081-b910-b50480def3c2", "title": "Good book – The Art of War", "url": "http://cupofcad.org/2025/01/21/good-book-the-art-of-war/", "published_at": "2025-01-21T12:00:00+00:00" }, { "id": "01a0c541-7f00-70cc-8ed7-deeeabcea92e", "title": "Welcome back!", "url": "http://cupofcad.org/2025/01/16/welcome-back/", "published_at": "2025-01-16T17:12:32+00:00" } ] posts Claim your blog
Back to cupofcad.org
Blog · corpus.blog/blogs/cupofcad.org/posts

cupofcad.org

cupofcad.org

2026

NURBS in CAD (part 2)original ↗
7 Sept 2026
NURBS in CAD (part I)original ↗
21 Aug 2026
End of an Eraoriginal ↗
12 Aug 2026
Who’s next?original ↗
12 Aug 2026
Bad papers in CADoriginal ↗
7 Jun 2026
Reflection on CAD algorithmsoriginal ↗
3 Jun 2026
Reverse engineering in CADoriginal ↗
28 Mar 2026
Gmsh and Netgen sampleoriginal ↗
13 Mar 2026
Netgen sample with OCCT (2026)original ↗
21 Feb 2026

2025

Hang in _heapwalk()original ↗
14 Sept 2025
Lofting algorithmoriginal ↗
28 Aug 2025
CAD future under spatial intelligence skiesoriginal ↗
19 Jul 2025
Free version of WordPress is bullsh*toriginal ↗
18 Jul 2025
Introduction to direct modeling (part 2)original ↗
14 Jul 2025
Shape similarity detectionoriginal ↗
27 Jun 2025
Introduction to direct modelingoriginal ↗
2 Jun 2025
Building OCCT on Steam Deckoriginal ↗
30 Apr 2025
On modeling kernelsoriginal ↗
26 Apr 2025
Geometric motives in GEMoriginal ↗
29 Mar 2025
Intersection in OCCToriginal ↗
19 Mar 2025
CAE workfloworiginal ↗
17 Mar 2025
What does it mean to be an expertoriginal ↗
14 Mar 2025
Geometric modeling in nutshelloriginal ↗
13 Mar 2025
License protection of SDKoriginal ↗
12 Mar 2025
static_cast vs c-style conversionoriginal ↗
11 Mar 2025
Point clouds generationoriginal ↗
10 Mar 2025
Software tools for geometeroriginal ↗
7 Mar 2025
On open-source products usageoriginal ↗
6 Mar 2025
Faceted and b-rep representationsoriginal ↗
5 Mar 2025
Where does CAD kernel begin (part 2)original ↗
4 Mar 2025
Where does CAD kernel beginoriginal ↗
3 Mar 2025
Cross-platform warning suppression in C++original ↗
28 Feb 2025
On standards and compilersoriginal ↗
27 Feb 2025
Pipe usage in OCCToriginal ↗
26 Feb 2025
About `auto` usageoriginal ↗
25 Feb 2025
Third-party products in our projectsoriginal ↗
24 Feb 2025
Demo – Gmsh with Open CASCADE Technologyoriginal ↗
21 Feb 2025
Qt building from sourcesoriginal ↗
20 Feb 2025
Tool – Include What You Useoriginal ↗
19 Feb 2025
Free CAD & mesh modelsoriginal ↗
18 Feb 2025
Compilation time of C++ projectsoriginal ↗
17 Feb 2025
Reconstruction of denoised dataoriginal ↗
14 Feb 2025
Point cloud filteringoriginal ↗
13 Feb 2025
Point cloud preparation for reconstructionoriginal ↗
12 Feb 2025
Poisson reconstruction in CGALoriginal ↗
11 Feb 2025
Software optimization principlesoriginal ↗
10 Feb 2025
Performance improving using Visual Studiooriginal ↗
7 Feb 2025
Why do we do pet projectsoriginal ↗
6 Feb 2025
Good Books – Pragmatic Programmer, Refactoring, and Clean Codeoriginal ↗
5 Feb 2025
Demo – Netgen with Open CASCADE Technologyoriginal ↗
4 Feb 2025
Netgen building with Open CASCADE Technologyoriginal ↗
3 Feb 2025
Convex hull implementations for C++original ↗
31 Jan 2025
What do you work fororiginal ↗
30 Jan 2025
Migration to VTK 9original ↗
29 Jan 2025
Building Open CASCADE Technology on Raspberry Pioriginal ↗
28 Jan 2025
Curve interpolation and approximation in Open CASCADE Technologyoriginal ↗
27 Jan 2025
Overview of Open CASCADE Technologyoriginal ↗
24 Jan 2025
C++ libraries for a geometer (part 2)original ↗
23 Jan 2025
C++ libraries for a geometeroriginal ↗
22 Jan 2025
Good book – The Art of Waroriginal ↗
21 Jan 2025
Welcome back!original ↗
16 Jan 2025