corpus.blog
41554 blogs · [ { "id": "01a096b8-eb9a-7309-ad64-7f66f4563b07", "title": "SUNLU FilaDC i10 Tested: Can a Desiccant Cabinet Dry Filament?", "url": "https://www.cnckitchen.com/blog/sunlu-filadc-i10-review", "published_at": "2026-09-12T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93644c796", "title": "Creality Raptor Pro vs. Revopoint Metro Y Pro: Which 3D Scanner Should You Buy?", "url": "https://www.cnckitchen.com/blog/creality-raptor-pro-vs-revopoint-metro-y-pro", "published_at": "2026-09-06T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9367fcfd5", "title": "I Automated Pressure Advance Using a Bed-Leveling Sensor", "url": "https://www.cnckitchen.com/blog/i-automated-pressure-advance-using-a-bed-leveling-sensor", "published_at": "2026-07-18T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf936ed1d0e", "title": "Half a Million Views Later… BumpMesh Is Way Better", "url": "https://www.cnckitchen.com/blog/half-a-million-views-later-bumpmesh-is-way-better", "published_at": "2026-07-11T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf937ec226a", "title": "Is This Laser the 3D Printing Solution We Needed?", "url": "https://www.cnckitchen.com/blog/is-this-laser-the-3d-printing-solution-we-needed", "published_at": "2026-06-20T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf938685b4e", "title": "Bambu A2L: My Honest Review After 400 Hours", "url": "https://www.cnckitchen.com/blog/bambu-a2l-my-honest-review-after-400-hours", "published_at": "2026-06-01T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9389d8306", "title": "Bambu Lab X2D Review: Affordable Dual-Nozzle Printing, with a Catch", "url": "https://www.cnckitchen.com/blog/bambu-lab-x2d-review-affordable-dual-nozzle-printing-with-a-catch", "published_at": "2026-04-14T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9396f7bb0", "title": "Stop Using Fuzzy Skin - I made something better!", "url": "https://www.cnckitchen.com/blog/stop-using-fuzzy-skin-i-made-something-better", "published_at": "2026-04-04T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93a436627", "title": "Are Our Heat-Set Insert Datasheets Wrong?", "url": "https://www.cnckitchen.com/blog/are-our-heat-set-insert-datasheets-wrong", "published_at": "2026-03-28T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93a619964", "title": "Anti-Aliasing for FDM 3D Printing Is Finally Here (Micro-Non-Planar Printing)", "url": "https://www.cnckitchen.com/blog/anti-aliasing-for-fdm-3d-printing-is-finally-here-micro-non-planar-printing", "published_at": "2026-02-07T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93b361246", "title": "The Beginner 3D Printing Guide I Wish I Had", "url": "https://www.cnckitchen.com/blog/the-beginner-3d-printing-guide-i-wish-i-had", "published_at": "2025-12-24T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93b438320", "title": "The H2C Review: Better Than a Toolchanger?", "url": "https://www.cnckitchen.com/blog/the-h2c-review-better-than-a-toolchanger", "published_at": "2025-11-18T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93b4eedb2", "title": "What Prusa Got Right (and Wrong) with the New CORE One L", "url": "https://www.cnckitchen.com/blog/prusa-core-one-l-review-what-they-got-right-and-wrong", "published_at": "2025-11-08T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93be2145f", "title": "Stop Printing Flat: The 45° Secret for Stronger Parts", "url": "https://www.cnckitchen.com/blog/stop-printing-flat-the-45-secret-for-stronger-parts", "published_at": "2025-10-26T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93c55cc84", "title": "The P2S Is the Upgrade No One Expected – But Everyone Wanted!", "url": "https://www.cnckitchen.com/blog/bambu-lab-p2s-review", "published_at": "2025-10-14T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93cfdf3fc", "title": "This FREE AI Tool Auto-Generates Gridfinity Bins!", "url": "https://www.cnckitchen.com/blog/this-free-ai-tool-auto-generates-gridfinity-bins", "published_at": "2025-08-30T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93d69eb7a", "title": "Bambu Lab H2S – The XL Printer Everyone Asked For", "url": "https://www.cnckitchen.com/blog/bambu-lab-h2s-review", "published_at": "2025-08-26T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93d842453", "title": "Carbon Fiber Nylon in 3D Printing: PA6 vs PA12 Tested", "url": "https://www.cnckitchen.com/blog/carbon-fiber-nylon-in-3d-printing-pa6-vs-pa12-tested", "published_at": "2025-08-17T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93e79b659", "title": "High-Temperature Resin Curing for More Strength", "url": "https://www.cnckitchen.com/blog/high-temperature-resin-curing-for-more-strength", "published_at": "2025-05-22T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93e80b8f0", "title": "I Tested the Bambu Lab H2D – And It’s More Than I Expected…", "url": "https://www.cnckitchen.com/blog/i-tested-the-bambu-lab-h2d-and-its-more-than-i-expected", "published_at": "2025-03-25T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93f2ea25a", "title": "How to use our Threaded-Insert Removal Tool", "url": "https://www.cnckitchen.com/blog/how-to-use-our-threaded-insert-removal-tool", "published_at": "2025-01-06T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93f460a2e", "title": "10 Tips for Better 3D Scans (feat. Creality CR-Scan Raptor)", "url": "https://www.cnckitchen.com/blog/3d-scanning-tips-creality-raptor", "published_at": "2024-09-14T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf93f4b62fd", "title": "Brick Layers - Make 3D prints stronger!", "url": "https://www.cnckitchen.com/blog/brick-layers-make-3d-prints-stronger", "published_at": "2024-02-18T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9402271f5", "title": "Calibration Cubes are BAD! This is how you calibrate your 3D Printer", "url": "https://www.cnckitchen.com/blog/calibration-cubes-are-bad-this-is-how-you-calibrate-your-3d-printer", "published_at": "2024-02-18T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf940ac71be", "title": "Recycling Plastic Cutlery into 3D Printing Filament", "url": "https://www.cnckitchen.com/blog/recycling-plastic-cutlery-into-3d-printing-filament", "published_at": "2023-12-23T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94177b244", "title": "Does a HEATED CHAMBER make your 3D prints STRONGER?", "url": "https://www.cnckitchen.com/blog/does-a-heated-chamber-make-your-3d-prints-stronger", "published_at": "2023-10-21T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9424fb7bc", "title": "10 AMAZING 3D Printing Projects: Rocky Mountain RepRap Festival 2023", "url": "https://www.cnckitchen.com/blog/10-amazing-3d-printing-projects-rocky-mountain-reprap-festival-2023", "published_at": "2023-10-10T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9426c865f", "title": "E3D Revo High Flow Review", "url": "https://www.cnckitchen.com/blog/e3d-revo-high-flow-review", "published_at": "2023-05-27T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94304ad67", "title": "Who would even buy a new Prusa MK4 in 2023?", "url": "https://www.cnckitchen.com/blog/who-would-even-buy-a-new-prusa-mk4-in-2023", "published_at": "2023-04-15T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf943270098", "title": "CHT High Flow nozzle for the BambuLab X1 & P1P", "url": "https://www.cnckitchen.com/blog/cht-high-flow-nozzle-for-the-bambulab-x1-amp-p1p", "published_at": "2023-04-01T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94355f41e", "title": "Which Glow in the Dark filament is the best?", "url": "https://www.cnckitchen.com/blog/which-glow-in-the-dark-filament-is-the-best", "published_at": "2023-03-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9444f16cc", "title": "Which is the strongest 3D printing Extruder?", "url": "https://www.cnckitchen.com/blog/which-is-the-strongest-3d-printing-extruder", "published_at": "2023-03-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf944e205b7", "title": "Arc Overhangs in PrusaSlicer*", "url": "https://www.cnckitchen.com/blog/arc-overhangs-in-prusaslicer", "published_at": "2023-03-18T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94568a70f", "title": "How the color of PLA filament influences 3D printed part strength", "url": "https://www.cnckitchen.com/blog/how-the-color-of-pla-filament-influences-3d-printed-part-strength", "published_at": "2023-01-31T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9458f1e47", "title": "Impressive 3D Printing Technology at FORMNEXT 2022", "url": "https://www.cnckitchen.com/blog/impressive-3d-printing-technology-at-formnext-2022", "published_at": "2023-01-21T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf945c9c734", "title": "Testing a $2 High-Flow nozzle from Aliexpress", "url": "https://www.cnckitchen.com/blog/testing-a-2-high-flow-nozzle-from-aliexpress", "published_at": "2022-12-17T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9461aca1c", "title": "Arc Overhangs - A new way of printing without Supports", "url": "https://www.cnckitchen.com/blog/arc-overhangs-a-new-way-of-printing-without-supports", "published_at": "2022-12-10T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94672e59f", "title": "Conical Slicing: A different angle of 3D printing", "url": "https://www.cnckitchen.com/blog/conical-slicing-a-different-angle-of-3d-printing", "published_at": "2022-11-12T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9473c3cb2", "title": "A Guide on how to use Conical Slicing", "url": "https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing", "published_at": "2022-11-11T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf947d9bd3d", "title": "How To use Threaded Inserts in Resin 3D Prints", "url": "https://www.cnckitchen.com/blog/how-to-use-threaded-inserts-in-resin-3d-prints", "published_at": "2022-10-29T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9488b53fa", "title": "The RotBot: 4-Axis Non-Planar 3D Printing", "url": "https://www.cnckitchen.com/blog/the-rotbot-4-axis-non-planar-3d-printing", "published_at": "2022-10-08T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf948f3bce2", "title": "Building a VORON 2.4 R2 in 2022 (LDO Kit)", "url": "https://www.cnckitchen.com/blog/building-a-voron-24-r2-in-2022-ldo-kit", "published_at": "2022-09-24T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf9493be897", "title": "Transparent FDM 3D Prints are Clearly Stronger!", "url": "https://www.cnckitchen.com/blog/transparent-fdm-3d-prints-are-clearly-stronger", "published_at": "2022-09-10T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf949c20f4a", "title": "Can Acetone Glue Layers of 3D Prints together?", "url": "https://www.cnckitchen.com/blog/can-acetone-glue-layers-of-3d-prints-together", "published_at": "2022-08-20T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94a525f95", "title": "Volcano Hotends are Obsolete: Just use Nuts!", "url": "https://www.cnckitchen.com/blog/volcano-hotends-are-obsolete-just-use-nuts", "published_at": "2022-08-06T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94b298669", "title": "What's STRONGER - 3D Prints or Wood?!", "url": "https://www.cnckitchen.com/blog/whats-stronger-3d-prints-or-wood", "published_at": "2022-06-04T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94b355073", "title": "How to set Extruder Tension?", "url": "https://www.cnckitchen.com/blog/how-to-set-extruder-tension", "published_at": "2022-05-07T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94b8fd99d", "title": "Tool SWAPPING with the WhamBam MUTANT V2 - Review", "url": "https://www.cnckitchen.com/blog/tool-swapping-with-the-whambam-mutant-v2-review", "published_at": "2022-04-23T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94badd1b4", "title": "Extrusion System Benchmark Tool for fast Prints", "url": "https://www.cnckitchen.com/blog/extrusion-system-benchmark-tool-for-fast-prints", "published_at": "2022-04-02T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94caa3c98", "title": "E3D RapidChange REVO Review", "url": "https://www.cnckitchen.com/blog/e3d-rapidchange-revo-review", "published_at": "2022-03-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94ceb1201", "title": "MEKANIKA EVO CNC Router REVIEW", "url": "https://www.cnckitchen.com/blog/mekanika-evo-cnc-router-review", "published_at": "2022-03-05T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94de03c18", "title": "CNC Kitchen Volcano Adapter: Anleitung", "url": "https://www.cnckitchen.com/blog/cnc-kitchen-volcano-adapter-anleitung", "published_at": "2022-02-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94ed2dae1", "title": "CNC Kitchen Volcano Adapter: Manual", "url": "https://www.cnckitchen.com/blog/cnc-kitchen-volcano-adapter-manual", "published_at": "2022-02-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94ee9e725", "title": "Non-Planar 3D Printing by Bending G-Code", "url": "https://www.cnckitchen.com/blog/non-planar-3d-printing-by-bending-g-code", "published_at": "2022-02-19T00:00:00+00:00" }, { "id": "01a08761-3762-7094-891f-1bf94fdfdc6f", "title": "Putting 3D Prints in a home compost", "url": "https://www.cnckitchen.com/blog/putting-3d-prints-in-a-home-compost", "published_at": "2022-02-05T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d3fdf0c41", "title": "HOW STRONG is PET Bottle Filament?", "url": "https://www.cnckitchen.com/blog/how-strong-is-pet-bottle-filament", "published_at": "2022-01-22T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4005e514", "title": "Do High Flow Nozzles mix Dual Color Filament?", "url": "https://www.cnckitchen.com/blog/do-high-flow-nozzles-mix-dual-color-filament", "published_at": "2022-01-08T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4070df73", "title": "Nozzle Spacer - CHT for Volcano Hotends", "url": "https://www.cnckitchen.com/blog/nozzle-spacer-cht-for-volcano-hotends", "published_at": "2021-12-18T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d40d7cac2", "title": "Cetus MK3 to Mellow FLY RRF E3 conversion", "url": "https://www.cnckitchen.com/blog/cetus-mk3-to-mellow-fly-rrf-e3-conversion", "published_at": "2021-12-10T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d41bac566", "title": "Dual-Color, Dichromatic 3D Printing Filament", "url": "https://www.cnckitchen.com/blog/dual-color-dichromatic-3d-printing-filament", "published_at": "2021-11-27T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4262f372", "title": "DIY High Flow 3D Printing Nozzle", "url": "https://www.cnckitchen.com/blog/diy-high-flow-3d-printing-nozzle", "published_at": "2021-11-20T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d430ede2e", "title": "3D Printing with a 0.1 mm nozzle", "url": "https://www.cnckitchen.com/blog/3d-printing-with-a-01-mm-nozzle", "published_at": "2021-11-06T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d434a30ee", "title": "Bondtech CHT High Flow Nozzle Reviewed", "url": "https://www.cnckitchen.com/blog/bondtech-cht-high-flow-nozzle-reviewed", "published_at": "2021-10-23T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4392fe4a", "title": "Fixing Inconsistent Extrusions Systematically", "url": "https://www.cnckitchen.com/blog/fixing-inconsistent-extrusions-systematically", "published_at": "2021-10-09T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d446ad8b9", "title": "Tips & Tricks for Heat-Set Inserts used in 3D printing", "url": "https://www.cnckitchen.com/blog/tips-and-tricks-for-heat-set-inserts", "published_at": "2021-10-01T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d44b5b6f7", "title": "Eco PLA filament with Spent Coffee Grounds", "url": "https://www.cnckitchen.com/blog/eco-pla-filament-with-spent-coffee-grounds", "published_at": "2021-08-28T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d44daaef2", "title": "G-code Basics for 3D Printing", "url": "https://www.cnckitchen.com/blog/g-code-basics-for-3d-printing", "published_at": "2021-08-07T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d44e92593", "title": "Tipps & Tricks für Gewindeeinsätze im 3D Druck", "url": "https://www.cnckitchen.com/blog/tipps-amp-tricks-fr-gewindeeinstze-im-3d-druck", "published_at": "2021-07-26T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d456e90f0", "title": "GUIDE: Resuming a failed 3D print", "url": "https://www.cnckitchen.com/blog/guide-resuming-a-failed-3d-print", "published_at": "2021-07-24T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4592745a", "title": "Recycling Old 3D Prints into New Filament", "url": "https://www.cnckitchen.com/blog/recycling-old-3d-prints-into-new-filament", "published_at": "2021-07-10T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d468dde63", "title": "Making simple PLA filament with the 3DEVO Composer 450", "url": "https://www.cnckitchen.com/blog/making-simple-pla-filament-with-the-3devo-composer-450", "published_at": "2021-06-26T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d473e3c71", "title": "Prusament PC Blend Review", "url": "https://www.cnckitchen.com/blog/prusament-pc-blend-review", "published_at": "2021-06-12T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d47aba5bf", "title": "Essentium PCTG Review", "url": "https://www.cnckitchen.com/blog/essentium-pctg-review", "published_at": "2021-05-29T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d48544b4e", "title": "High Speed Printing: Hot End, Temperatures, Silicone Sock and Materials", "url": "https://www.cnckitchen.com/blog/high-speed-printing-hot-end-temperatures-silicone-sock-and-materials", "published_at": "2021-05-15T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d48d40f1b", "title": "Texturing 3D prints in IdeaMaker for Strength", "url": "https://www.cnckitchen.com/blog/texturing-3d-prints-in-ideamaker-for-strength", "published_at": "2021-04-24T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4934ea6d", "title": "Prusa MK2.5S DUET 3 Mini 5+ conversion", "url": "https://www.cnckitchen.com/blog/prusa-mk25s-duet-3-mini-5-conversion", "published_at": "2021-04-10T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4992b65c", "title": "ARTILLERY Hornet 3D Printer - First Look", "url": "https://www.cnckitchen.com/blog/artillery-hornet-3d-printer-first-look", "published_at": "2021-04-05T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4a185838", "title": "Bang-Bang or PID Bed Temperature Control?", "url": "https://www.cnckitchen.com/blog/bang-bang-or-pid-bed-temperature-control", "published_at": "2021-03-27T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4a46b8e9", "title": "The VORON 0 - A Mini, Fast & Awesome Core XY 3D Printer", "url": "https://www.cnckitchen.com/blog/the-voron-0-a-mini-fast-amp-awesome-core-xy-3d-printer", "published_at": "2021-03-13T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4ade25c5", "title": "Testing BiMetallic Heat Breaks", "url": "https://www.cnckitchen.com/blog/testing-bimetallic-heat-breaks", "published_at": "2021-02-20T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4b315bb0", "title": "First Thoughts: VORON 0 Kit from Formbot", "url": "https://www.cnckitchen.com/blog/first-thoughts-voron-0-formbot-kit", "published_at": "2021-02-13T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4baae2c1", "title": "Snapmaker 2.0 Review", "url": "https://www.cnckitchen.com/blog/snapmaker-20-review", "published_at": "2021-02-06T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4c2f461e", "title": "3D Printer Nozzle Camera", "url": "https://www.cnckitchen.com/blog/3d-printer-nozzle-camera", "published_at": "2021-01-23T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4cee3ab5", "title": "Multi-material Coat Hook on the E3D Toolchanger", "url": "https://www.cnckitchen.com/blog/multi-material-coat-hook-on-the-e3d-toolchanger", "published_at": "2021-01-16T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4d4aa44c", "title": "The Influence of Extrusion Temperature on Layer Adhesion", "url": "https://www.cnckitchen.com/blog/the-influence-of-extrusion-temperature-on-layer-adhesion", "published_at": "2020-12-19T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4dfc68c2", "title": "Testing colorFabb varioShore TPU - Foaming 3D printing filament", "url": "https://www.cnckitchen.com/blog/testing-colorfabb-varioshore-tpu-foaming-3d-printing-filament", "published_at": "2020-11-28T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4e980b73", "title": "3D Printing Trimmer Line", "url": "https://www.cnckitchen.com/blog/3d-printing-trimmer-line", "published_at": "2020-11-14T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4ebd8bfa", "title": "FLUX Beamo Review - A 30W Compact Laser Cutter/Engraver", "url": "https://www.cnckitchen.com/blog/flux-beamo-review-a-30w-comapct-laser-cutterengraver", "published_at": "2020-11-07T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4f026c45", "title": "Testing the strength of 3D prints re-melted in salt", "url": "https://www.cnckitchen.com/blog/testing-the-strength-of-3d-prints-re-melted-in-salt", "published_at": "2020-10-24T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4f2708cc", "title": "FLSUN Q5 Delta 3D printer review", "url": "https://www.cnckitchen.com/blog/flsun-q5-delta-3d-printer-review", "published_at": "2020-10-03T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4f319bf9", "title": "Annealing 3D prints in Plaster", "url": "https://www.cnckitchen.com/blog/annealing-3d-prints-in-plaster", "published_at": "2020-09-17T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d4f778803", "title": "How designs the strongest hook? - Polymaker competition", "url": "https://www.cnckitchen.com/blog/how-designs-the-strongest-hook-polymaker-competition", "published_at": "2020-09-12T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d504c1136", "title": "The difference of PLA and PLA+ tested! (feat. Polymaker)", "url": "https://www.cnckitchen.com/blog/the-difference-of-pla-and-pla-tested-feat-polymaker", "published_at": "2020-08-16T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d50d17097", "title": "PC-Core ABS - Testing Dual-Material Filament for Warp-less Annealing", "url": "https://www.cnckitchen.com/blog/pc-core-abs-testing-dual-material-filament-for-warp-less-annealing", "published_at": "2020-07-18T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d50f36cb0", "title": "Machining a 3D printer nozzle on a Mini Lathe", "url": "https://www.cnckitchen.com/blog/machining-a-3d-printer-nozzle-on-a-mini-lathe", "published_at": "2020-06-27T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d51d0cca0", "title": "CR-6 SE - Crealitys NEW $4,400,000 (over)hyped Kickstarter 3D printer", "url": "https://www.cnckitchen.com/blog/cr-6-se-crealitys-new-4400000-overhyped-kickstarter-3d-printer", "published_at": "2020-06-20T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d520cb0e0", "title": "Helicoils, Threaded Insets and Embedded Nuts in 3D Prints - Strength & Strength Assessment", "url": "https://www.cnckitchen.com/blog/helicoils-threaded-insets-and-embedded-nuts-in-3d-prints-strength-amp-strength-assessment", "published_at": "2020-05-30T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d52d6f0b8", "title": "Simple 3D printer noise reduction with a concrete paver", "url": "https://www.cnckitchen.com/blog/reduce-your-3d-printing-noise-with-a-concrete-paver", "published_at": "2020-05-16T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d539d6475", "title": "Creality Ender-3 Pro VS Alfawise U30 Pro - Which is the better budget 3D printer?", "url": "https://www.cnckitchen.com/blog/creality-ender-3-pro-vs-alfawise-u30-pro-which-is-the-better-budget-3d-printer", "published_at": "2020-05-10T00:00:00+00:00" }, { "id": "01a08761-3763-7047-8ac3-df9d5425351e", "title": "Investigating different methods of filament drying (Dehydrator, Vacuum, Oven & Desiccant)", "url": "https://www.cnckitchen.com/blog/filament-drying-methods-dehydrator-vacuum-oven-desiccant", "published_at": "2020-04-25T00:00:00+00:00" } ] posts Claim your blog
Back to cnckitchen.com
Blog · corpus.blog/blogs/cnckitchen.com/posts

cnckitchen.com

cnckitchen.com

2026

SUNLU FilaDC i10 Tested: Can a Desiccant Cabinet Dry Filament?original ↗
12 Sept 2026
Creality Raptor Pro vs. Revopoint Metro Y Pro: Which 3D Scanner Should You Buy?original ↗
6 Sept 2026
I Automated Pressure Advance Using a Bed-Leveling Sensororiginal ↗
18 Jul 2026
Half a Million Views Later… BumpMesh Is Way Betteroriginal ↗
11 Jul 2026
Is This Laser the 3D Printing Solution We Needed?original ↗
20 Jun 2026
Bambu A2L: My Honest Review After 400 Hoursoriginal ↗
1 Jun 2026
Bambu Lab X2D Review: Affordable Dual-Nozzle Printing, with a Catchoriginal ↗
14 Apr 2026
Stop Using Fuzzy Skin - I made something better!original ↗
4 Apr 2026
Are Our Heat-Set Insert Datasheets Wrong?original ↗
28 Mar 2026
Anti-Aliasing for FDM 3D Printing Is Finally Here (Micro-Non-Planar Printing)original ↗
7 Feb 2026

2025

The Beginner 3D Printing Guide I Wish I Hadoriginal ↗
24 Dec 2025
The H2C Review: Better Than a Toolchanger?original ↗
18 Nov 2025
What Prusa Got Right (and Wrong) with the New CORE One Loriginal ↗
8 Nov 2025
Stop Printing Flat: The 45° Secret for Stronger Partsoriginal ↗
26 Oct 2025
The P2S Is the Upgrade No One Expected – But Everyone Wanted!original ↗
14 Oct 2025
This FREE AI Tool Auto-Generates Gridfinity Bins!original ↗
30 Aug 2025
Bambu Lab H2S – The XL Printer Everyone Asked Fororiginal ↗
26 Aug 2025
Carbon Fiber Nylon in 3D Printing: PA6 vs PA12 Testedoriginal ↗
17 Aug 2025
High-Temperature Resin Curing for More Strengthoriginal ↗
22 May 2025
I Tested the Bambu Lab H2D – And It’s More Than I Expected…original ↗
25 Mar 2025
How to use our Threaded-Insert Removal Tooloriginal ↗
6 Jan 2025

2024

10 Tips for Better 3D Scans (feat. Creality CR-Scan Raptor)original ↗
14 Sept 2024
Brick Layers - Make 3D prints stronger!original ↗
18 Feb 2024
Calibration Cubes are BAD! This is how you calibrate your 3D Printeroriginal ↗
18 Feb 2024

2023

Recycling Plastic Cutlery into 3D Printing Filamentoriginal ↗
23 Dec 2023
Does a HEATED CHAMBER make your 3D prints STRONGER?original ↗
21 Oct 2023
10 AMAZING 3D Printing Projects: Rocky Mountain RepRap Festival 2023original ↗
10 Oct 2023
E3D Revo High Flow Revieworiginal ↗
27 May 2023
Who would even buy a new Prusa MK4 in 2023?original ↗
15 Apr 2023
CHT High Flow nozzle for the BambuLab X1 & P1Poriginal ↗
1 Apr 2023
Which Glow in the Dark filament is the best?original ↗
19 Mar 2023
Which is the strongest 3D printing Extruder?original ↗
19 Mar 2023
Arc Overhangs in PrusaSlicer*original ↗
18 Mar 2023
How the color of PLA filament influences 3D printed part strengthoriginal ↗
31 Jan 2023
Impressive 3D Printing Technology at FORMNEXT 2022original ↗
21 Jan 2023

2022

Testing a $2 High-Flow nozzle from Aliexpressoriginal ↗
17 Dec 2022
Arc Overhangs - A new way of printing without Supportsoriginal ↗
10 Dec 2022
Conical Slicing: A different angle of 3D printingoriginal ↗
12 Nov 2022
A Guide on how to use Conical Slicingoriginal ↗
11 Nov 2022
How To use Threaded Inserts in Resin 3D Printsoriginal ↗
29 Oct 2022
The RotBot: 4-Axis Non-Planar 3D Printingoriginal ↗
8 Oct 2022
Building a VORON 2.4 R2 in 2022 (LDO Kit)original ↗
24 Sept 2022
Transparent FDM 3D Prints are Clearly Stronger!original ↗
10 Sept 2022
Can Acetone Glue Layers of 3D Prints together?original ↗
20 Aug 2022
Volcano Hotends are Obsolete: Just use Nuts!original ↗
6 Aug 2022
What's STRONGER - 3D Prints or Wood?!original ↗
4 Jun 2022
How to set Extruder Tension?original ↗
7 May 2022
Tool SWAPPING with the WhamBam MUTANT V2 - Revieworiginal ↗
23 Apr 2022
Extrusion System Benchmark Tool for fast Printsoriginal ↗
2 Apr 2022
E3D RapidChange REVO Revieworiginal ↗
19 Mar 2022
MEKANIKA EVO CNC Router REVIEWoriginal ↗
5 Mar 2022
CNC Kitchen Volcano Adapter: Anleitungoriginal ↗
19 Feb 2022
CNC Kitchen Volcano Adapter: Manualoriginal ↗
19 Feb 2022
Non-Planar 3D Printing by Bending G-Codeoriginal ↗
19 Feb 2022
Putting 3D Prints in a home compostoriginal ↗
5 Feb 2022
HOW STRONG is PET Bottle Filament?original ↗
22 Jan 2022
Do High Flow Nozzles mix Dual Color Filament?original ↗
8 Jan 2022

2021

Nozzle Spacer - CHT for Volcano Hotendsoriginal ↗
18 Dec 2021
Cetus MK3 to Mellow FLY RRF E3 conversionoriginal ↗
10 Dec 2021
Dual-Color, Dichromatic 3D Printing Filamentoriginal ↗
27 Nov 2021
DIY High Flow 3D Printing Nozzleoriginal ↗
20 Nov 2021
3D Printing with a 0.1 mm nozzleoriginal ↗
6 Nov 2021
Bondtech CHT High Flow Nozzle Reviewedoriginal ↗
23 Oct 2021
Fixing Inconsistent Extrusions Systematicallyoriginal ↗
9 Oct 2021
Tips & Tricks for Heat-Set Inserts used in 3D printingoriginal ↗
1 Oct 2021
Eco PLA filament with Spent Coffee Groundsoriginal ↗
28 Aug 2021
G-code Basics for 3D Printingoriginal ↗
7 Aug 2021
Tipps & Tricks für Gewindeeinsätze im 3D Druckoriginal ↗
26 Jul 2021
GUIDE: Resuming a failed 3D printoriginal ↗
24 Jul 2021
Recycling Old 3D Prints into New Filamentoriginal ↗
10 Jul 2021
Making simple PLA filament with the 3DEVO Composer 450original ↗
26 Jun 2021
Prusament PC Blend Revieworiginal ↗
12 Jun 2021
Essentium PCTG Revieworiginal ↗
29 May 2021
High Speed Printing: Hot End, Temperatures, Silicone Sock and Materialsoriginal ↗
15 May 2021
Texturing 3D prints in IdeaMaker for Strengthoriginal ↗
24 Apr 2021
Prusa MK2.5S DUET 3 Mini 5+ conversionoriginal ↗
10 Apr 2021
ARTILLERY Hornet 3D Printer - First Lookoriginal ↗
5 Apr 2021
Bang-Bang or PID Bed Temperature Control?original ↗
27 Mar 2021
The VORON 0 - A Mini, Fast & Awesome Core XY 3D Printeroriginal ↗
13 Mar 2021
Testing BiMetallic Heat Breaksoriginal ↗
20 Feb 2021
First Thoughts: VORON 0 Kit from Formbotoriginal ↗
13 Feb 2021
Snapmaker 2.0 Revieworiginal ↗
6 Feb 2021
3D Printer Nozzle Cameraoriginal ↗
23 Jan 2021
Multi-material Coat Hook on the E3D Toolchangeroriginal ↗
16 Jan 2021

2020

The Influence of Extrusion Temperature on Layer Adhesionoriginal ↗
19 Dec 2020
Testing colorFabb varioShore TPU - Foaming 3D printing filamentoriginal ↗
28 Nov 2020
3D Printing Trimmer Lineoriginal ↗
14 Nov 2020
FLUX Beamo Review - A 30W Compact Laser Cutter/Engraveroriginal ↗
7 Nov 2020
Testing the strength of 3D prints re-melted in saltoriginal ↗
24 Oct 2020
FLSUN Q5 Delta 3D printer revieworiginal ↗
3 Oct 2020
Annealing 3D prints in Plasteroriginal ↗
17 Sept 2020
How designs the strongest hook? - Polymaker competitionoriginal ↗
12 Sept 2020
The difference of PLA and PLA+ tested! (feat. Polymaker)original ↗
16 Aug 2020
PC-Core ABS - Testing Dual-Material Filament for Warp-less Annealingoriginal ↗
18 Jul 2020
Machining a 3D printer nozzle on a Mini Latheoriginal ↗
27 Jun 2020
CR-6 SE - Crealitys NEW $4,400,000 (over)hyped Kickstarter 3D printeroriginal ↗
20 Jun 2020
Helicoils, Threaded Insets and Embedded Nuts in 3D Prints - Strength & Strength Assessmentoriginal ↗
30 May 2020
Simple 3D printer noise reduction with a concrete paveroriginal ↗
16 May 2020
Creality Ender-3 Pro VS Alfawise U30 Pro - Which is the better budget 3D printer?original ↗
10 May 2020
Investigating different methods of filament drying (Dehydrator, Vacuum, Oven & Desiccant)original ↗
25 Apr 2020
Next