corpus.blog
56,966 blogs · [ { "id": "01a08760-f0f3-7132-9574-282f8d5681da", "title": "Back to the Future – Fixing Marty’s truck with Fusion", "url": "https://clintbrown.co.uk/2025/08/16/back-to-the-future-fixing-martys-truck-with-fusion/", "published_at": "2025-08-16T04:12:00+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8d66dac6", "title": "AutoConstrain July 2025 Updates", "url": "https://clintbrown.co.uk/2025/07/15/autoconstrain-july-2025-updates/", "published_at": "2025-07-15T09:51:59+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8d75e3e3", "title": "AutoConstrain for Fusion Sketches", "url": "https://clintbrown.co.uk/2025/01/28/autoconstrain-for-fusion-sketches/", "published_at": "2025-01-28T10:48:48+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8e058e00", "title": "Multiple unit Drawings in Autodesk Fusion", "url": "https://clintbrown.co.uk/2025/01/16/multiple-unit-drawings-in-autodesk-fusion/", "published_at": "2025-01-16T09:08:00+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8ed402c7", "title": "ISO v ASME Hole Callouts", "url": "https://clintbrown.co.uk/2024/12/05/iso-v-asme-hole-callouts/", "published_at": "2024-12-05T17:36:49+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8fac419b", "title": "4 Years of Drawings Evolution", "url": "https://clintbrown.co.uk/2024/11/26/4-years-of-drawings-evolution/", "published_at": "2024-11-26T16:34:34+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f8fe579f3", "title": "Representation Overrides vs. Inspection Dimensions", "url": "https://clintbrown.co.uk/2024/11/06/representation-overrides-vs-inspection-dimensions/", "published_at": "2024-11-06T15:29:22+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f907e016a", "title": "Autodesk Fusion — The Ultimate Guide to Drawing Automation.", "url": "https://clintbrown.co.uk/2024/07/25/autodesk-fusion-the-ultimate-guide-to-drawing-automation/", "published_at": "2024-07-25T14:43:24+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f90ebbef4", "title": "Autodesk Fusion – Moving a Section, Detail or projected view to another sheet", "url": "https://clintbrown.co.uk/2024/07/25/autodesk-fusion-moving-a-section-detail-or-projected-view-to-another-sheet/", "published_at": "2024-07-25T08:16:39+00:00" }, { "id": "01a08760-f0f3-7132-9574-282f90ed490d", "title": "Watermarking a drawing with a Logo", "url": "https://clintbrown.co.uk/2024/06/21/watermarking-a-drawing-with-a-logo/", "published_at": "2024-06-21T12:34:12+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d607962d", "title": "Copy Tolerances – Full Section Lines – T&S", "url": "https://clintbrown.co.uk/2024/05/15/copy-tolerances-full-section-lines-ts/", "published_at": "2024-05-15T09:46:09+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d65d4bc0", "title": "Autodesk Fusion: Drawing References", "url": "https://clintbrown.co.uk/2024/04/10/drawing-references/", "published_at": "2024-04-10T08:38:28+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d7050623", "title": "Fusion Drawing Automation Template Options", "url": "https://clintbrown.co.uk/2024/02/26/fusion-drawing-automation-template-options/", "published_at": "2024-02-26T10:55:43+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d73dca4e", "title": "Changing Mass Units on a Drawing – Autodesk Fusion", "url": "https://clintbrown.co.uk/2024/02/02/changing-mass-units-on-a-drawing-autodesk-fusion/", "published_at": "2024-02-02T09:26:48+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d79a69dc", "title": "Pre-Populated Custom Attributes", "url": "https://clintbrown.co.uk/2024/01/22/pre-populated-custom-attributes/", "published_at": "2024-01-22T14:19:07+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d81f4008", "title": "Fusion Attributes & Squishy Text", "url": "https://clintbrown.co.uk/2024/01/17/fusion-attributes-squishy-text/", "published_at": "2024-01-17T09:15:30+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d8548c4f", "title": "2023 a Year in Review", "url": "https://clintbrown.co.uk/2024/01/04/2023-a-year-in-review/", "published_at": "2024-01-04T13:04:13+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d933c13d", "title": "Angular Dimension tips: Fusion 360", "url": "https://clintbrown.co.uk/2023/09/26/angular-dimension-tips/", "published_at": "2023-09-26T10:48:37+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7d9d4187f", "title": "Inspection Dimensions: Fusion 360", "url": "https://clintbrown.co.uk/2023/09/12/inspection-dimensions/", "published_at": "2023-09-12T09:17:45+00:00" }, { "id": "01a0c502-a07e-7263-8154-28d7da34cb50", "title": "Fusion 360 weird cursor in drawings", "url": "https://clintbrown.co.uk/2023/09/11/fusion-360-weird-cursor-in-drawings/", "published_at": "2023-09-11T13:54:09+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9c7fba7d", "title": "Edge Symbol in Fusion 360", "url": "https://clintbrown.co.uk/2023/08/25/edge-symbol-in-fusion-360/", "published_at": "2023-08-25T12:31:23+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9d07f784", "title": "Fusion 360 Drawings – Last Save Date", "url": "https://clintbrown.co.uk/2023/07/25/fusion-360-drawings-last-save-date/", "published_at": "2023-07-25T13:01:49+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9d80a4a4", "title": "Inventor: Project Holes Add-in", "url": "https://clintbrown.co.uk/2023/06/10/inventor-project-holes-add-in/", "published_at": "2023-06-10T09:02:47+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9e0943d1", "title": "What Does ChatGPT Know About Drawings?", "url": "https://clintbrown.co.uk/2023/05/10/what-does-chatgpt-know-about-drawings/", "published_at": "2023-05-10T09:47:45+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9ebf716e", "title": "Automatic Center Marks & Center Lines", "url": "https://clintbrown.co.uk/2023/04/04/automatic-center-marks-center-lines/", "published_at": "2023-04-04T03:46:48+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9f340c98", "title": "Sheet Metal Hole Tables from STEP", "url": "https://clintbrown.co.uk/2023/04/03/sheet-metal-hole-tables-from-step/", "published_at": "2023-04-03T09:05:25+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eb9fbaa01b", "title": "Discover the Powerful Features Added to Fusion Drawings in The Last Year", "url": "https://clintbrown.co.uk/2023/01/06/discover-the-powerful-features-added-to-fusion-drawings-in-the-last-year/", "published_at": "2023-01-06T16:00:32+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eba01125fd", "title": "November updates – Duplicate Sheet & Advanced Print", "url": "https://clintbrown.co.uk/2022/11/29/november-updates-duplicate-sheet-advanced-print/", "published_at": "2022-11-29T14:49:21+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eba020c348", "title": "Quick Tip: Formatting Text & Dimensions + Fractions", "url": "https://clintbrown.co.uk/2022/08/25/quick-tip-formatting-fractions-in-text/", "published_at": "2022-08-25T09:39:01+00:00" }, { "id": "01a0c508-5e40-7051-833c-c0eba0fc8163", "title": "Show Animation Trail-Lines on Drawings", "url": "https://clintbrown.co.uk/2022/08/09/show-animation-trail-lines-on-drawings/", "published_at": "2022-08-09T09:27:58+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a0147c8771", "title": "Troubleshooting Dual Graphics cards on Windows", "url": "https://clintbrown.co.uk/2022/07/27/troubleshooting-dual-graphics-cards-on-windows/", "published_at": "2022-07-27T17:13:27+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a014d8b73a", "title": "July Quality of Life Update", "url": "https://clintbrown.co.uk/2022/07/20/july-quality-of-life-update/", "published_at": "2022-07-20T19:11:59+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a015bdb016", "title": "Quick Tip – Positive Stacked Tolerances", "url": "https://clintbrown.co.uk/2022/07/18/quick-tip-positive-stacked-tolerances/", "published_at": "2022-07-18T09:41:58+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a0167b5741", "title": "Numberpile for the Win!", "url": "https://clintbrown.co.uk/2022/06/06/numberpile-for-the-win/", "published_at": "2022-06-06T07:21:05+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a0174ebbf2", "title": "Auxiliary Views in Fusion 360", "url": "https://clintbrown.co.uk/2022/06/01/auxiliary-views-in-fusion-360/", "published_at": "2022-06-01T05:22:30+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a017ef48cd", "title": "Hole Charts from STEP Files", "url": "https://clintbrown.co.uk/2022/05/23/hole-charts-from-step-files/", "published_at": "2022-05-23T08:49:11+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a01850c09c", "title": "Hole Charts in Fusion 360 Drawings", "url": "https://clintbrown.co.uk/2022/04/29/hole-charts-in-fusion-360-drawings/", "published_at": "2022-04-29T18:17:14+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a018ec48ac", "title": "Rev Tables, Markers & Clouds", "url": "https://clintbrown.co.uk/2022/04/04/rev-tables-markers-clouds/", "published_at": "2022-04-04T14:23:20+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a019bebeff", "title": "Jan/Feb 2022 Drawing Updates", "url": "https://clintbrown.co.uk/2022/01/27/jan-feb-2022-drawing-updates/", "published_at": "2022-01-27T11:41:47+00:00" }, { "id": "01a0c518-ca44-716b-91d9-23a019ec7d1f", "title": "Setting up 3rd Angle ISO Templates", "url": "https://clintbrown.co.uk/2022/01/05/setting-up-3rd-angle-iso-templates/", "published_at": "2022-01-05T08:00:46+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cab960b4d", "title": "Fusion Drawings Wrapped 2021", "url": "https://clintbrown.co.uk/2021/12/16/fusion-drawings-wrapped-2021/", "published_at": "2021-12-16T11:17:09+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cabd651b3", "title": "Nov/Dec New Drawing Features", "url": "https://clintbrown.co.uk/2021/12/02/nov-december-new-features/", "published_at": "2021-12-02T13:22:11+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cabd95f66", "title": "September Drawing Enhancements", "url": "https://clintbrown.co.uk/2021/10/18/september-drawing-enhancements/", "published_at": "2021-10-18T09:41:54+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cac2f9bc2", "title": "Unicode Reference for Extra Symbols", "url": "https://clintbrown.co.uk/2021/09/17/unicode-reference-for-extra-symbols/", "published_at": "2021-09-17T13:20:06+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cac9b8a86", "title": "Edit Balloon Sizes & Text Heights", "url": "https://clintbrown.co.uk/2021/09/04/edit-balloon-sizes-text-heights/", "published_at": "2021-09-04T09:34:30+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cacb5dec7", "title": "Fusion 360 August Drawing Updates", "url": "https://clintbrown.co.uk/2021/08/24/fusion-360-august-drawing-updates/", "published_at": "2021-08-24T07:10:35+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cad77e28f", "title": "Fusion 360 Quick Tip: Editing Parts Lists", "url": "https://clintbrown.co.uk/2021/08/04/fusion-360-quick-tip-editing-parts-lists/", "published_at": "2021-08-04T06:28:36+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cadf631cb", "title": "Switching Title Blocks", "url": "https://clintbrown.co.uk/2021/07/15/switching-title-blocks/", "published_at": "2021-07-15T09:12:49+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94cae8c21bd", "title": "Fusion 360 Quick Tip: Relative Views", "url": "https://clintbrown.co.uk/2021/06/24/fusion-360-quick-tip-relative-views/", "published_at": "2021-06-24T07:15:56+00:00" }, { "id": "01a0c523-ba66-70e2-b666-e94caf4ab697", "title": "Fusion 360: Quick Tip – View Alignment", "url": "https://clintbrown.co.uk/2021/05/13/fusion-360-quick-tip-view-alignment/", "published_at": "2021-05-13T09:41:09+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-7316776085ee", "title": "Fusion 360 Calibrating 1:1 Prints", "url": "https://clintbrown.co.uk/2021/04/08/fusion-360-calibrating-11-prints/", "published_at": "2021-04-08T08:10:44+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-731677ef0ba3", "title": "Smart Template – “All Level” Drawings", "url": "https://clintbrown.co.uk/2021/04/06/smart-template-all-level-drawings/", "published_at": "2021-04-06T06:45:54+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-731678dbfff3", "title": "Quick Tip – Smart Templates", "url": "https://clintbrown.co.uk/2021/04/06/quick-tip-smart-templates/", "published_at": "2021-04-06T06:45:04+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-731679732c68", "title": "Quick Tip – Creating & Reusing DWG Title Blocks", "url": "https://clintbrown.co.uk/2021/03/10/quick-tip-creating-reusing-dwg-title-blocks/", "published_at": "2021-03-10T14:59:24+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-731679d0ad0f", "title": "Fusion 360 – Marching on!", "url": "https://clintbrown.co.uk/2021/03/03/fusion-360-marching-on/", "published_at": "2021-03-03T09:05:44+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-73167a4a7a44", "title": "What’s New In Fusion 360 Design & Engineering – January 2021", "url": "https://clintbrown.co.uk/2021/01/20/whats-new-in-fusion-360-design-engineering-january-2021/", "published_at": "2021-01-20T17:38:24+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-73167a87bd56", "title": "25 iLogic Routines to Speed Up Drawing Creation", "url": "https://clintbrown.co.uk/2021/01/14/25-ilogic-routines-to-speed-up-drawing-creation/", "published_at": "2021-01-14T06:37:00+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-73167a8a40a7", "title": "iLogic: Export Flat Patterns of iPart Members to DXF", "url": "https://clintbrown.co.uk/2021/01/13/ilogic-export-flat-patterns-of-ipart-members-to-dxf/", "published_at": "2021-01-13T07:19:00+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-73167ae3939f", "title": "iLogic: Export Custom iProperties Of All iPart Instances", "url": "https://clintbrown.co.uk/2021/01/09/ilogic-export-custom-iproperties-of-all-ipart-instances/", "published_at": "2021-01-09T06:06:00+00:00" }, { "id": "01a0c52f-3c86-72d0-b851-73167b966fe5", "title": "iLogic Quick Tip: Get IP Address", "url": "https://clintbrown.co.uk/2021/01/06/ilogic-quick-tip-get-ip-address/", "published_at": "2021-01-06T06:04:00+00:00" }, { "id": "01a0c539-897f-7398-849b-05920fd0852a", "title": "Best Wishes & A Loft Feature", "url": "https://clintbrown.co.uk/2020/12/30/best-wishes-a-loft-feature/", "published_at": "2020-12-30T15:52:02+00:00" }, { "id": "01a0c539-897f-7398-849b-05921028bd0e", "title": "Export Flat Patterns iPart: Get Name, Export, Repeat", "url": "https://clintbrown.co.uk/2020/12/19/export-flat-patterns-ipart-get-name-export-repeat/", "published_at": "2020-12-19T06:56:00+00:00" }, { "id": "01a0c539-897f-7398-849b-0592109918fa", "title": "2020 Milestones – Thank you", "url": "https://clintbrown.co.uk/2020/12/17/2020-milestones-thank-you/", "published_at": "2020-12-17T17:14:02+00:00" }, { "id": "01a0c539-897f-7398-849b-0592110b1db0", "title": "iLogic – File Open Timer", "url": "https://clintbrown.co.uk/2020/12/12/ilogic-file-open-timer/", "published_at": "2020-12-12T06:58:00+00:00" }, { "id": "01a0c539-897f-7398-849b-05921171f277", "title": "iLogic Quick Tip: File Open Dialogue", "url": "https://clintbrown.co.uk/2020/12/05/ilogic-quick-tip-file-open-dialogue/", "published_at": "2020-12-05T06:59:00+00:00" }, { "id": "01a0c539-897f-7398-849b-059212701fb1", "title": "Fusion Lifecycle Quick Tip: BoM Unit Precision", "url": "https://clintbrown.co.uk/2020/12/02/fusion-lifecycle-quick-tip-bom-unit-precision/", "published_at": "2020-12-02T13:56:26+00:00" }, { "id": "01a0c539-897f-7398-849b-05921328fcc8", "title": "Run iLogic Rules from the Ribbon", "url": "https://clintbrown.co.uk/2020/11/28/run-ilogic-rules-from-the-ribbon/", "published_at": "2020-11-28T06:49:00+00:00" }, { "id": "01a0c539-897f-7398-849b-059213c67e19", "title": "Quick Tip: Run “Before Save” Rule Only Once in Assemblies", "url": "https://clintbrown.co.uk/2020/11/21/quick-tip-run-before-save-rule-only-once-in-assemblies/", "published_at": "2020-11-21T06:38:00+00:00" }, { "id": "01a0c539-897f-7398-849b-05921474dee1", "title": "Fusion Lifecycle Quick Tip: Logo Manager", "url": "https://clintbrown.co.uk/2020/11/18/fusion-lifecycle-quick-tip-logo-manager/", "published_at": "2020-11-18T12:41:00+00:00" }, { "id": "01a0c539-897f-7398-849b-0592151f5f3e", "title": "Autodesk Vault: Instant Document Previews", "url": "https://clintbrown.co.uk/2020/11/14/autodesk-vault-instant-document-previews/", "published_at": "2020-11-14T06:37:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c6440b4a23", "title": "Using Barcodes with Vault Mobile App", "url": "https://clintbrown.co.uk/2020/11/07/using-barcodes-with-vault-mobile-app/", "published_at": "2020-11-07T07:37:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c644e68d53", "title": "iLogic Quick Tip: Remove Assembly Appearance Overrides", "url": "https://clintbrown.co.uk/2020/11/04/c/", "published_at": "2020-11-04T06:09:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c645112503", "title": "Get Control Definition Names – iLogic Tool", "url": "https://clintbrown.co.uk/2020/10/31/get-control-definition-names-ilogic-tool/", "published_at": "2020-10-31T06:42:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c64547adb7", "title": "iLogic Quick Tip: Delete Sick Dimensions", "url": "https://clintbrown.co.uk/2020/10/28/ilogic-quick-tip-delete-sick-dimensions/", "published_at": "2020-10-28T14:27:30+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c646258c66", "title": "Autodesk Open Up Access to 5 Previous Versions", "url": "https://clintbrown.co.uk/2020/10/26/autodesk-open-up-access-to-5-previous-versions/", "published_at": "2020-10-26T17:14:47+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c646ad1bc1", "title": "iLogic: Supress Constraints & Ground All Components", "url": "https://clintbrown.co.uk/2020/10/24/ilogic-supress-constraints-amp-ground-all-components/", "published_at": "2020-10-24T05:48:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c6470e9a4e", "title": "iLogic Quick Tip: Launch Drawing From Model", "url": "https://clintbrown.co.uk/2020/10/21/ilogic-quick-tip-launch-drawing-from-model/", "published_at": "2020-10-21T04:39:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c647bbef3b", "title": "Running Inventor in the Cloud – with Forge", "url": "https://clintbrown.co.uk/2020/10/17/running-inventor-in-the-cloud/", "published_at": "2020-10-17T04:51:00+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c64898f12f", "title": "Vault 2021.1 What’s New", "url": "https://clintbrown.co.uk/2020/10/15/vault-2021-1-whats-new/", "published_at": "2020-10-15T07:50:08+00:00" }, { "id": "01a0c542-cdb3-71b6-b9fd-a9c649023bd4", "title": "iLogic: Show Overridden Dimensions", "url": "https://clintbrown.co.uk/2020/10/10/ilogic-show-overridden-dimensions/", "published_at": "2020-10-10T06:07:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3adc5205", "title": "Yemanjá!", "url": "https://clintbrown.co.uk/2020/10/07/yemanja/", "published_at": "2020-10-07T10:08:58+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3ae780ef", "title": "iLogic – Occurrence Selection Filter In Drawings", "url": "https://clintbrown.co.uk/2020/10/03/ilogic-occurrence-selection-filter-in-drawings/", "published_at": "2020-10-03T02:57:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3b94e3e5", "title": "AutoCAD 2021: Fixing A Blank Vault Tab", "url": "https://clintbrown.co.uk/2020/09/30/autocad-2021-fixing-a-blank-vault-tab/", "published_at": "2020-09-30T06:48:36+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3bd632f2", "title": "Adding a Column to Content Center Steel Families", "url": "https://clintbrown.co.uk/2020/09/26/adding-a-column-to-content-center-steel-families/", "published_at": "2020-09-26T05:26:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3c7c196d", "title": "Not Getting Fusion Lifecycle Notification Emails?", "url": "https://clintbrown.co.uk/2020/09/24/not-getting-fusion-lifecycle-notification-emails/", "published_at": "2020-09-24T04:42:49+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3d4fd0e6", "title": "iLogic: Setting Extra Layers In DXF Exports", "url": "https://clintbrown.co.uk/2020/09/19/ilogic-setting-extra-layers-in-dxf-exports/", "published_at": "2020-09-19T05:39:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3e2f154e", "title": "Calculating The Pre-form Length of a Bent Tube", "url": "https://clintbrown.co.uk/2020/09/12/calculating-the-pre-form-length-of-a-bent-tube/", "published_at": "2020-09-12T05:48:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3e3a6b2a", "title": "iLogic: Export All Flat Patterns To One DXF", "url": "https://clintbrown.co.uk/2020/09/05/ilogic-export-all-flat-patterns-to-one-dxf/", "published_at": "2020-09-05T06:02:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3ec9617d", "title": "Vault Mobile App: Setup & More", "url": "https://clintbrown.co.uk/2020/08/29/vault-mobile-app-setup-more/", "published_at": "2020-08-29T05:17:00+00:00" }, { "id": "01a0c54b-a725-71e4-8633-708d3f6d2ab0", "title": "iLogic Properties Tool-Tip #3", "url": "https://clintbrown.co.uk/2020/08/22/ilogic-properties-tool-tip-3/", "published_at": "2020-08-22T05:17:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e5e9beb5a", "title": "iLogic: Unexpected Results", "url": "https://clintbrown.co.uk/2020/08/15/ilogic-unexpected-results/", "published_at": "2020-08-15T05:34:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e5ec31803", "title": "iLogic: Rotating Section Views – Guest Post", "url": "https://clintbrown.co.uk/2020/08/08/ilogic-rotating-section-views-guest-post/", "published_at": "2020-08-08T06:37:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e5f6d8345", "title": "Run Inventor As Administrator", "url": "https://clintbrown.co.uk/2020/08/02/run-inventor-as-administrator/", "published_at": "2020-08-02T08:18:45+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e6054fbe4", "title": "iLogic Normalise Browser Nodes – With Code", "url": "https://clintbrown.co.uk/2020/07/29/ilogic-normalise-browser-nodes-with-code/", "published_at": "2020-07-29T12:47:31+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e60f32273", "title": "iLogic: Get & Set User Parameters", "url": "https://clintbrown.co.uk/2020/07/27/ilogic-get-set-user-parameters/", "published_at": "2020-07-27T09:55:03+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e610378da", "title": "iLogic: Toggle Mate & Joint Suppression", "url": "https://clintbrown.co.uk/2020/07/25/ilogic-toggle-mate-amp-joint-suppression/", "published_at": "2020-07-25T06:07:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e61427e44", "title": "DXDIAG", "url": "https://clintbrown.co.uk/2020/07/23/dxdiag/", "published_at": "2020-07-23T06:42:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e61e904cc", "title": "Export Formatted Parts List with iLogic", "url": "https://clintbrown.co.uk/2020/07/18/export-formatted-parts-list-with-ilogic/", "published_at": "2020-07-18T06:47:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e62d4c580", "title": "iLogic – Centre & Arrange Dimensions", "url": "https://clintbrown.co.uk/2020/07/11/ilogic-centre-arrange-dimensions/", "published_at": "2020-07-11T06:02:00+00:00" }, { "id": "01a0c553-e385-70f7-8474-9a8e6361fe2e", "title": "Setting Dimension Precision with iLogic", "url": "https://clintbrown.co.uk/2020/07/04/setting-dimension-precision-with-ilogic/", "published_at": "2020-07-04T05:53:33+00:00" } ] posts Claim your blog
Back to clintbrown.co.uk
Blog · corpus.blog/blogs/clintbrown.co.uk/posts

clintbrown.co.uk

clintbrown.co.uk

2025

Back to the Future – Fixing Marty’s truck with Fusionoriginal ↗
16 Aug 2025
AutoConstrain July 2025 Updatesoriginal ↗
15 Jul 2025
AutoConstrain for Fusion Sketchesoriginal ↗
28 Jan 2025
Multiple unit Drawings in Autodesk Fusionoriginal ↗
16 Jan 2025

2024

ISO v ASME Hole Calloutsoriginal ↗
5 Dec 2024
4 Years of Drawings Evolutionoriginal ↗
26 Nov 2024
Representation Overrides vs. Inspection Dimensionsoriginal ↗
6 Nov 2024
Autodesk Fusion — The Ultimate Guide to Drawing Automation.original ↗
25 Jul 2024
Autodesk Fusion – Moving a Section, Detail or projected view to another sheetoriginal ↗
25 Jul 2024
Watermarking a drawing with a Logooriginal ↗
21 Jun 2024
Copy Tolerances – Full Section Lines – T&Soriginal ↗
15 May 2024
Autodesk Fusion: Drawing Referencesoriginal ↗
10 Apr 2024
Fusion Drawing Automation Template Optionsoriginal ↗
26 Feb 2024
Changing Mass Units on a Drawing – Autodesk Fusionoriginal ↗
2 Feb 2024
Pre-Populated Custom Attributesoriginal ↗
22 Jan 2024
Fusion Attributes & Squishy Textoriginal ↗
17 Jan 2024
2023 a Year in Revieworiginal ↗
4 Jan 2024

2023

Angular Dimension tips: Fusion 360original ↗
26 Sept 2023
Inspection Dimensions: Fusion 360original ↗
12 Sept 2023
Fusion 360 weird cursor in drawingsoriginal ↗
11 Sept 2023
Edge Symbol in Fusion 360original ↗
25 Aug 2023
Fusion 360 Drawings – Last Save Dateoriginal ↗
25 Jul 2023
Inventor: Project Holes Add-inoriginal ↗
10 Jun 2023
What Does ChatGPT Know About Drawings?original ↗
10 May 2023
Automatic Center Marks & Center Linesoriginal ↗
4 Apr 2023
Sheet Metal Hole Tables from STEPoriginal ↗
3 Apr 2023
Discover the Powerful Features Added to Fusion Drawings in The Last Yearoriginal ↗
6 Jan 2023

2022

November updates – Duplicate Sheet & Advanced Printoriginal ↗
29 Nov 2022
Quick Tip: Formatting Text & Dimensions + Fractionsoriginal ↗
25 Aug 2022
Show Animation Trail-Lines on Drawingsoriginal ↗
9 Aug 2022
Troubleshooting Dual Graphics cards on Windowsoriginal ↗
27 Jul 2022
July Quality of Life Updateoriginal ↗
20 Jul 2022
Quick Tip – Positive Stacked Tolerancesoriginal ↗
18 Jul 2022
Numberpile for the Win!original ↗
6 Jun 2022
Auxiliary Views in Fusion 360original ↗
1 Jun 2022
Hole Charts from STEP Filesoriginal ↗
23 May 2022
Hole Charts in Fusion 360 Drawingsoriginal ↗
29 Apr 2022
Rev Tables, Markers & Cloudsoriginal ↗
4 Apr 2022
Jan/Feb 2022 Drawing Updatesoriginal ↗
27 Jan 2022
Setting up 3rd Angle ISO Templatesoriginal ↗
5 Jan 2022

2021

Fusion Drawings Wrapped 2021original ↗
16 Dec 2021
Nov/Dec New Drawing Featuresoriginal ↗
2 Dec 2021
September Drawing Enhancementsoriginal ↗
18 Oct 2021
Unicode Reference for Extra Symbolsoriginal ↗
17 Sept 2021
Edit Balloon Sizes & Text Heightsoriginal ↗
4 Sept 2021
Fusion 360 August Drawing Updatesoriginal ↗
24 Aug 2021
Fusion 360 Quick Tip: Editing Parts Listsoriginal ↗
4 Aug 2021
Switching Title Blocksoriginal ↗
15 Jul 2021
Fusion 360 Quick Tip: Relative Viewsoriginal ↗
24 Jun 2021
Fusion 360: Quick Tip – View Alignmentoriginal ↗
13 May 2021
Fusion 360 Calibrating 1:1 Printsoriginal ↗
8 Apr 2021
Smart Template – “All Level” Drawingsoriginal ↗
6 Apr 2021
Quick Tip – Smart Templatesoriginal ↗
6 Apr 2021
Quick Tip – Creating & Reusing DWG Title Blocksoriginal ↗
10 Mar 2021
Fusion 360 – Marching on!original ↗
3 Mar 2021
What’s New In Fusion 360 Design & Engineering – January 2021original ↗
20 Jan 2021
25 iLogic Routines to Speed Up Drawing Creationoriginal ↗
14 Jan 2021
iLogic: Export Flat Patterns of iPart Members to DXForiginal ↗
13 Jan 2021
iLogic: Export Custom iProperties Of All iPart Instancesoriginal ↗
9 Jan 2021
iLogic Quick Tip: Get IP Addressoriginal ↗
6 Jan 2021

2020

Best Wishes & A Loft Featureoriginal ↗
30 Dec 2020
Export Flat Patterns iPart: Get Name, Export, Repeatoriginal ↗
19 Dec 2020
2020 Milestones – Thank youoriginal ↗
17 Dec 2020
iLogic – File Open Timeroriginal ↗
12 Dec 2020
iLogic Quick Tip: File Open Dialogueoriginal ↗
5 Dec 2020
Fusion Lifecycle Quick Tip: BoM Unit Precisionoriginal ↗
2 Dec 2020
Run iLogic Rules from the Ribbonoriginal ↗
28 Nov 2020
Quick Tip: Run “Before Save” Rule Only Once in Assembliesoriginal ↗
21 Nov 2020
Fusion Lifecycle Quick Tip: Logo Manageroriginal ↗
18 Nov 2020
Autodesk Vault: Instant Document Previewsoriginal ↗
14 Nov 2020
Using Barcodes with Vault Mobile Apporiginal ↗
7 Nov 2020
iLogic Quick Tip: Remove Assembly Appearance Overridesoriginal ↗
4 Nov 2020
Get Control Definition Names – iLogic Tooloriginal ↗
31 Oct 2020
iLogic Quick Tip: Delete Sick Dimensionsoriginal ↗
28 Oct 2020
Autodesk Open Up Access to 5 Previous Versionsoriginal ↗
26 Oct 2020
iLogic: Supress Constraints & Ground All Componentsoriginal ↗
24 Oct 2020
iLogic Quick Tip: Launch Drawing From Modeloriginal ↗
21 Oct 2020
Running Inventor in the Cloud – with Forgeoriginal ↗
17 Oct 2020
Vault 2021.1 What’s Neworiginal ↗
15 Oct 2020
iLogic: Show Overridden Dimensionsoriginal ↗
10 Oct 2020
Yemanjá!original ↗
7 Oct 2020
iLogic – Occurrence Selection Filter In Drawingsoriginal ↗
3 Oct 2020
AutoCAD 2021: Fixing A Blank Vault Taboriginal ↗
30 Sept 2020
Adding a Column to Content Center Steel Familiesoriginal ↗
26 Sept 2020
Not Getting Fusion Lifecycle Notification Emails?original ↗
24 Sept 2020
iLogic: Setting Extra Layers In DXF Exportsoriginal ↗
19 Sept 2020
Calculating The Pre-form Length of a Bent Tubeoriginal ↗
12 Sept 2020
iLogic: Export All Flat Patterns To One DXForiginal ↗
5 Sept 2020
Vault Mobile App: Setup & Moreoriginal ↗
29 Aug 2020
iLogic Properties Tool-Tip #3original ↗
22 Aug 2020
iLogic: Unexpected Resultsoriginal ↗
15 Aug 2020
iLogic: Rotating Section Views – Guest Postoriginal ↗
8 Aug 2020
Run Inventor As Administratororiginal ↗
2 Aug 2020
iLogic Normalise Browser Nodes – With Codeoriginal ↗
29 Jul 2020
iLogic: Get & Set User Parametersoriginal ↗
27 Jul 2020
iLogic: Toggle Mate & Joint Suppressionoriginal ↗
25 Jul 2020
DXDIAGoriginal ↗
23 Jul 2020
Export Formatted Parts List with iLogicoriginal ↗
18 Jul 2020
iLogic – Centre & Arrange Dimensionsoriginal ↗
11 Jul 2020
Setting Dimension Precision with iLogicoriginal ↗
4 Jul 2020
Next